Wyze App
To update the Wyze app, go to the Google Play Store or the Apple App Store to download the update. Click here to learn more about updating the Wyze app and checking which version you have installed.
Android App
2.42.0.292 (May 25, 2023)
- Added support for Glass Breaking and Gun Shooting sound detection for Cam Protect customers
-
Added support for Smart Vision for Cam Protect customers
-
Added a reminder for Wyze Home Monitoring customers to check if a Permit Number is required by local authorities
-
Updated Security Camera logic in Home Monitoring so it displays the most recent footage of Motion, Person, or CO/Smoke Events of cameras used for Wyze Home Monitoring
-
Added support for auto-renew for Cam Plus customers who want to enable it in the app
-
Bug fixes
2.41.5 (April 26, 2023)
- Added a control for the Wyze app notification sound under Push Notification Settings
- Added support for Cam Protect in Canada
- Optimized the services onboarding user experience
- Optimized Event thumbnail information for customers without subscriptions
- Bug fixes
2.41.0.200 (April 18, 2023)
- Changed the notification sound for Wyze notifications so that they’re different than standard phone notification tones
- Added support for an Event label for microSD card Playback for Wyze Cam OG
- Added support for an enhanced global notification setting with a snooze function
- Added support for showing the same SSID for combined 2.4 GHz and 5 GHz bands separately
- Moved app security settings to Account > My Account in the Wyze app
- Improved UI/UX for the Rule Action list
- Improved the stability and workflow for Cam Protect
- Optimized the Service page user experience and Cam Plus in-app purchase flow
- Bug fixes
2.40.0.190 (March 8, 2023)
- Added Rules support for Wyze Home Monitoring to use Mode changes and critical events as triggers to control your Wyze devices
- Added support for Additional PIN that allows 10 additional PIN for Wyze Home Monitoring (firmware update required)
- Improved Shortcut Rules UI/UX
- Fixed a bug that caused thumbnails to rotate 90 degrees on the Home tab after setting up a doorbell
- Fixed a bug that prevented Wyze Cam Outdoor v2 Event Videos from downloading properly when assigned as Wyze Home Monitoring Security Cameras
- Bug fixes
2.39.0.179 (February 14, 2023)
- Added a Request Dispatch icon on the live stream for Wyze Cam v2, v3, Pan, and Pan v2 that Cam Protect subscribers can use
- Updated the Rules description for inverse actions
- Optimized camera groups
- Bug fixes
2.38.1.161 (January 5, 2023)
- Improved the camera group experience
- Bug fixes
2.38.0.153 (December 15, 2022)
- Added support for email Two-Factor Authentication (2FA)
- Added a new Wyze Cam onboarding with a Cam Plus free trial and opt-out option
- Added Santa holiday AI detection to keep the magic alive
- Added the ability to hold the Request Dispatch button in the Monitoring tab to immediately call for help
- Removed the video verification process for Cam Protect armed systems in Test Mode
- Improved UI in Rule Settings
- Fixed a bug that prevented cancelling environment hazard remediation when Wyze Home Monitoring is Disarmed
- Bug fixes
2.37.1.134 (November 28, 2022)
- Fixed a bug that prevented the Cam Plus Apply License page from showing when a user tried to add a camera to their account with an existing Cam Plus subscription
- Fixed a bug in the Create Rule page for sensor groups that showed a name error and caused the Rule action to fail
2.37.0.117 (November 17, 2022)
- Cam Plus Pro is now Cam Protect!
- Added a new alarm flow to Cam Protect that allows Noonlight agents to verify the video to help determine if there is a real threat
- Added Rule Explore Tab to help customers explore how Wyze devices can work together to make your home smarter
- Optimized the camera onboarding flow for Cam Plus users to improve the license binding experience
- Fixed a bug that prevented sound when playing 12-second Cam Plus Lite videos
- Fixed a bug that prevented Notification options from being selected correctly in Smart Support Tool
- Fixed a bug that prevented users from adding devices to Smart Control on Wyze Switch
- UI improvements
- Bug fixes
2.36.0.96 (November 1, 2022)
- Added support for Wyze Cam v3 Pro
- Added support for Canadian addresses to enable Wyze Home Monitoring in Canada
- Added AI Notifications for Wyze Cam v2, Wyze Cam v3, Wyze Cam Pan v1, and Wyze Cam Pan v2 with a firmware update to limit notifications to Events you care about
- Added AI-only Events recording options for Wyze Cam v2, Wyze Cam v3, Wyze Cam Pan v1, and Wyze Cam Pan v2 on the latest firmware to allow control over what Events you want recording
- AI notification and recording minimum firmware versions:
- Wyze Cam v2 → 4.9.9.1273 and above
- Wyze Cam v3 → 4.36.10.2000 and above
- Wyze Cam Pan v1 → 4.10.9.1273 and above
- Wyze Cam Pan v2 → 4.49.3.2000 and above
2.35.0.88 (September 29, 2022)
- Cam Plus Pro is now supported on Wyze Cam Pan v2
- Added support for Wyze Light Strip and Wyze Light Strip Pro effects outside of Music Mode
- Added support for Wyze Bulb and Wyze Bulb Color effects outside of Music Mode when grouped with Wyze Light Strip or Wyze Light Strip Pro
- Updated the Wyze Cam v3/Wyze Video Doorbell Pro Device Notification and Event Recording pages to remove inconsistencies
- Fixed an inconsistency between the web and app versions of the Wyze Thermostat compatibility checker
- Minor UI improvements
- Bug fixes
2.34.0.75 (September 1, 2022)
- Fixed a bug that prompted an app update when the app is on the most recent version
2.34.0.73 (August 24, 2022)
- Added support for a delay between a person being detected on an armed camera and an alarm being triggered
- Added support for Home/Away in Preset Rules
- Added support for product search in Shop
- Added support for Wyze Home Monitoring to Wyze Widgets
- Added support for manual recording for adults to Wyze Scale S and Wyze Scale X
- Added Wyze Cam Outdoor v1 and v2 compatibility to Smart Support Tool
- Updated the Monitoring tab setup flow for accounts with a Cam Plus Pro license
- Fixed a bug that caused the Playback entrance in Events to not work for some people
- Bug fixes
2.33.1.162 (July 29, 2022)
- Fixed a bug that prevented the Bluetooth connection permission window from appearing when connecting Wyze Watch
2.33.0.161 (July 21, 2022)
- Added support for arming and disarming Cam Plus Pro devices using day/time schedules
- Added more diagnostics for some commonly reported issues in the Smart Support Tool
- Improved thumbnail image messaging
- Fixed a bug that prevented the garage door status from refreshing automatically in the Home tab
- Fixed a Cam Plus free trial bug
- Bug fixes
2.32.0.154 (June 16, 2022)
- Added support for Wyze Home Monitoring Emergency Contacts. Trusted friends and family members can be added to the list for additional security.
- Added support for turning on Power and Lighting devices for X minutes as an action in Rules
- Added a new Preset Rule that turns on lights if a person is detected with Cam Plus
- Added additional Scenes for lighting products
- Added support for Muscle Mass Rate and Pet Mode in Wyze Scale S and Wyze Scale X
- Optimized the map display for Wyze Robot Vacuum
- Fixed a bug that prevented Cam Plus Lite devices from using AI triggers in Rules
- Fixed a typo in the Wyze Air Purifier installation instruction
- Bug fixes
2.31.0.145 (May 18, 2022)
- Added support for Wyze account deletion
- Added support for grouping all Wyze lighting family products
- Added Monitoring Schedule control toggles to allow pausing schedules for Wyze Home Monitoring
- Added support for Wyze Cam Outdoor v2 in Wyze Home Monitoring (the Security Camera feature fix will be released later)
- Added support for a Smart Support tool under Wyze Support to self diagnose device configuration issues (works only for Wyze Cam v3 with a Cam Plus license for now)
- Added links to the Wyze communities
- Improved the device sharing experience with people who don’t have Wyze accounts yet
2.30.1.141 (May 11, 2022)
- Opened Cam Plus Pro to the public
- Shop now uses the same platform as our website and the checkout experience has been adjusted
- Bug fixes
2.30.0.130 (April 20, 2022)
- Added support for Wyze Air Purifier (code merged in the 2.29 version)
- Added support for Luggage Mode for Wyze Scale S
- Added a 5-star rating in Cleaning History for Wyze Robot Vacuum
- Added an FAQ page in Wyze Robot Vacuum Settings
- Modified the date range for Export Data, Heart Rate measurement, and Set Goal for Wyze Scale S
2.29.2.127 (April 8, 2022)
- Fixed a bulk update bug that would cause firmware updates to be available without following update order logic
- Fixed a bug that caused Wyze Cam Outdoor to report incorrect status for microSD cards in the Base Station
2.29.1.116 (March 28, 2022)
- Moved Cam Plus Lite’s position on the Services page to be easier to find
- Removed the Cam Plus banner shown under snapshot Events and replaced it with a more contextually dynamic banner
- Improved the Cam Plus license activation experience
- Fixed an AI sound detection toggle bug
- Fixed a bug that caused the Add Cameras button to disappear in the Cam Plus Lite section
2.29.0.114 (March 16, 2022)
General App:
- Added support for Wyze Gun Safe
Wyze Video Doorbell Pro:
- Added an additional field of view option for Wyze Video Doorbell Pro
Wyze Video Doorbell
- Improved the experience of receiving Wyze Video Doorbell VOIP calls on a locked phone
Wyze Robot Vacuum:
- Improved the Schedules page for Wyze Robot Vacuum
- Added Smart Schedule recommendations based on cleaning activities for Wyze Robot Vacuum
Wyze Scale S:
- Added a new real-time camera review to help locate the correct camera lens for heart rate measurement for Wyze Scale S
- Added a custom date range option for data export for Wyze Scale S
Wyze Home Monitoring:
- Added permit number support. If your local enforcement requires it, please apply for a monitoring permit and fill in the permit number in Home Monitoring Settings. Failing to do so may result in a refusal to dispatch from the police.
- Added dispatch instructions support. If the entrance to your home is hard to navigate through, add dispatch instructions for quicker arrival.
Cam Plus:
- Added Cam Plus auto-activation for bundle devices during device setup
Cam Plus Pro:
- Updated the onboarding steps for new Cam Plus Pro users
2.28.2.111 (March 9. 2022)
- Fixed a tablet crashing issue
2.28.1.109 (March 7, 2022)
- Added support for Cam Plus Lite
- Added support for thumbnail images for Wyze Cam Events for compatible cameras. Video clips are still available for devices using Cam Plus Lite.
2.28.0.102 (January 26, 2022)
-
Redesigned the Shop tab to be the single best place to shop for Wyze products
-
New limited-time Flash Sales let you score Wyze products at prices not possible before
-
Added support for Subscriber Discounts for those with Cam Plus and Cam Plus Pro
-
Added support for exclusive app shop coupons
-
Sorted products into categories to make browsing easier
-
New and popular products are now featured on the Shop tab’s main page
-
Added support for tracking shipped orders
-
Moved My Orders out of the Account tab and into the Shop tab
-
Added 30-second rewind and skip forward buttons in microSD card Playback for a better scrubbing/searching experience
-
Added the ability to group Wyze Bulb White and Wyze Bulb Color with Wyze Light Strip
-
Added support for multiple contact numbers in Wyze Home Monitoring for Noonlight to confirm alarms with shared users
-
Added the ability to group Wyze Sense Climate Sensors
-
Added individual AI notification toggles for Events with people, vehicles, packages, and pets detected
-
Updated the Cam Plus Free Trial UI
-
Bug fixes
2.27.33 (December 21, 2021)
- Added Voice Over IP support for Wyze Video Doorbell
- Added support for Rule recommendations
- Added support for sharing Wyze Home Monitoring with people you trust
- Added Sunrise/Sunset support for Wyze Lamp Socket
- Added ceiling mount instructions for Wyze Cam Floodlight
- Added a non-living things option in Baby/Pet Mode for Wyze Scale S
- Added Wyze Plug and Wyze Plug Outdoor to the bulk update page
- Added 5 Christmas song tones for Wyze Video Doorbell Pro
- Updated app Sync Time to be compatible with old and new camera firmware versions
- Improved instructions for measuring heart rate for Wyze Scale S
- Fixed a firmware update bug for Wyze Plug Outdoor
- Fixed a Schedule setting bug for Wyze Plug Outdoor
- Fixed a battery display error for Wyze Cam Outdoor
- Fixed a bug that prevented assigning Cam Plus to Wyze Video Doorbell Pro
- Fixed a crashing bug when grouping Wyze Light Strip
Note: This app is being gradually released. If you do not see it now, you should see it later this week.
2.26.36 (December 8, 2021)
- Fixed a crashing issue for Wyze Video Doorbell Pro
- Fixed a Wyze Watch 47mm C face syncing bug
2.26.22 (November 11, 2021)
- Added support for Wyze Video Doorbell Pro
- Added support for Wyze Cam Lamp Socket
- Added support for Wyze Cam Floodlight
- Added support for heart rate measurement for Wyze Scale S
- Added support for a beta tag for beta firmware in individual and bulk firmware update views
- Make Your Voice Heard in Home Monitoring Settings welcomes you to give us feedback and learn what we are developing for you
- Bug fixes
2.25.31 (November 3, 2021)
- Added support for Wyze Watch 47mm C
2.25.22 (October 13, 2021)
- Added support for Wyze Scale S
- Added default options for room names for Wyze Robot Vacuum
- Added support for the current year when inputting birth year for Wyze Scale
- Added Monitoring Schedule in Home Monitoring for routine arming and disarming convenience without using the Keypad or your phone
- Fixed a siren countdown bug for Wyze Cam v3
- Fixed a bug that distorted zoomed-in video image for Wyze Cam v3
- Fixed a crashing bug when sorting devices within Wyze Bulb Color groups
- Fixed a bug that displayed different temperature on the Home tab and device page for Wyze Leak Sensor
- Fixed a bug that prevented temperature refreshing for Wyze Climate Sensor
(Wyze Cam Outdoor firmware 4.16.2.26 and Base Station firmware 4.17.1.287 required for the below 2)
- Improved Cam Plus performance for Wyze Cam Outdoor
- Fixed the flashing blue light issue for Wyze Cam Outdoor Base Station
2.24.51 (September 16, 2021)
- Added support for Wyze Light Strip
- Added support for Wyze Light Strip Pro
- Added Trends for Wyze Home Monitoring to show how you use the service to protect the things you care about
- Added support for Wyze Home Monitoring users to change names in Monitoring Settings after setup
- Lifted the mandatory Keypad + one sensor limit for Wyze Home Monitoring Sense Hub setup
- Added the ability to set up Wyze Home Monitoring from the Home tab Add Device page
- Added a Mic Noise Reduction toggle for Wyze Buds
- Changed the "Energy" EQ mode to "Sport" for Wyze Buds
- Bug fixes
2.24.23 (September 1, 2021)
- Added support for Wyze Buds
- Added support for Sunrise/Sunset in Rules (This update is being sent to a limited number of users at first and will be more widely available later.)
- Added support for Wyze Leak and Climate Sensors in Rules (This update is being sent to a limited number of users at first and will be more widely available later.)
- Added support for Wyze Leak and Climate Sensors for Wyze Home Monitoring
- Redesigned Wyze Bulb UI
- Added a Wyze Lock button to the Wyze Video Doorbell page
- Added more detail options such as a tree or crop types and growth stages to Wyze Sprinkler Controller Smart Schedules
- Optimized the in-app purchase experience
- Fixed a Playback bug for Wyze Cam v3
- Fixed a bug that caused the app to crash when accessing camera groups
- Bug fixes
2.23.21 (August 4, 2021)
- Added support for Wyze Buds Pro
- Added support for Wyze Leak Sensor
- Added support for Wyze Climate Sensor
- Added support for location-based Rules triggers based on arrival or departure from a location
- Added support for unlocking Wyze Lock from the Wyze Video Doorbell page
- Added support for repeat schedules for Wyze Sprinkler Controller
- Added animation playback and sharing for Wyze Robot Vacuum
- Added weight comparison to the Wyze Scale page
- Fixed a bug that prevented downloading time lapse videos for Wyze Cams
- Fixed a bug that prevented live streaming on the Wyze Home Monitoring Security Camera page
- Bug fixes
Note: The location-based Rules triggers are being rolled out gradually. If you do not have it available today, you should get access in the next 3 weeks.
2.22.31 (July 28, 2021)
- Changed minimum app operating system (OS) compatibility from Android 5.0+ to 7.0+
- Security improvements
- Bug fixes
Note: The minimum OS change will not affect apps already downloaded onto your device. If your operating system is below the threshold, you will not be able to see future app updates in the app store. This change is being made to support upcoming security changes and features. We encourage you to update your OS at your earliest opportunity and apologize for any inconvenience.
2.22.21 (July 12, 2021)
- Improved the Message Center
- Added an SMS option for Wyze News and Promos
- Optimized Device List UI
- Added Wyze Watch 44 and 47mm to the bulk firmware update page
- Optimized Wyze Floor Lamp setup logic and Device tab UI
- Security improvements
- Bug fixes
2.21.27 (June 24, 2021)
- Fixed an issue that may cause slow app response
2.21.26 (June 16, 2021)
- Updated the button design for non-subscribers in the Monitoring tab
2.21.25 (June 14, 2021)
- Added Siren support and a Battery Usage Summary for Wyze Cam Outdoor (requires Wyze Cam Outdoor firmware version 4.17.1.123 and Base Station: 4.16.2.7)
- Added a low battery indicator for Wyze Sense v2
- Added a Vacation Mode indicator for Wyze Bulb Color
- Added support for Wyze Lock Google Home integration
- Improved Smart Schedule for Wyze Sprinkler Controller
- Enabled no-go zone rotation for Wyze Robot Vacuum
- Enabled app sorting for Wyze Watch 44mm
- Enabled bulk editing schedules for Wyze Floor Lamp
- Fixed a bug that displayed the 12s limit icon for Cam Plus users
- Fixed a detection zone setting bug for Wyze Cam v2
- Fixed a bug that prevented Event videos from playing for Wyze Video Doorbell
- Fixed a bug that prevented Wyze Video Doorbell Live Stream for Wyze Home Monitoring
- Bug fixes
2.20.21 (May 12, 2021)
General App:
- Added support for Wyze Floor Lamp
- Added a red dot indicator for beta users when a new product enters Beta Program
- Added support for phone numbers changes in Wyze Home Monitoring
- Fixed a bug that prevented iOS users from going through the setup flow after resetting Wyze Home Monitoring
- UI improvements
- Bug fixes
Wyze Thermostat (firmware update required):
- Added support for Fan Activation Delay
- During Auto mode, when the user sets a heating and cooling temperature difference less than 5°F, the temperature will change automatically when either one is changed
- Moved Fan Cycle to Advanced Settings and added further in-app information
- The Fan Cycle interval is now changed to 0-30 min/hour. The default value is 0 min/hour
Wyze Video Doorbell (firmware update required):
- Added support for Quick Replies for Wyze Video Doorbell
2.19.15 (April 22, 2021)
- Improved the update instructions for Wyze Sense Keypad
- Improved Home page data loading for Wyze Home Monitoring
- Fixed bugs that caused the user to get stuck during setup for Wyze Home Monitoring
- Fixed a count down issue for Wyze Home Monitoring
- Fixed a notification setting bug for Wyze Watch 44mm and 47mm
2.19.14 (April 8, 2021)
- Added support for a custom motion detection zone for Wyze Cam v3 (future firmware update required)
- Added support for Wyze Cam being used as a zone image for Wyze Sprinkler
- Enabled room selection when idle and disabled room selection when cleaning for Wyze Robot Vacuum
- Improved map creation and management for Wyze Robot Vacuum
- Improved the setup process for Wyze Video Doorbell
- Fixed a time zone setting bug for Wyze Bulb Color schedules
- Fixed a bug that caused the app to crash when bulk updating Wyze Plug Outdoor
- Fixed a bug that caused inconsistency in the Beta Program product list
- Fixed incorrect personal information for Wyze Watch 47mm
- Fixed a bug that continued to prompt Wyze Home Monitoring firmware updates when fully updated
- Fixed a bug that prevented auto-unlock from functioning properly for Wyze Lock
2.18.41 (March 25, 2021)
- Added support for Home Monitoring Service
- Added support for Wyze Entry Sensor v2
- Added support for Wyze Motion Sensor v2
- Added support for Wyze Sense Hub
- Added support for Wyze Sense Keypad
- Added support for Home hub
2.18.18 (March 9, 2021)
- Added support for Wyze Bulb Color
- Added support for a detection zone for Wyze Video Doorbell (firmware update required)
- Modified the map drag range for Wyze Robot Vacuum
- Added Wyze Support to the Wyze Robot Vacuum Settings page
- Bug fixes
2.17.41 (February 24, 2021)
- Fixed a bug that prevented Wyze Robot Vacuum users from dragging the map
- Fixed a bug that prevented Wyze Robot Vacuum users from dividing rooms
- Bug fixes
2.17.7 (January 26, 2021)
- Added support for Wyze Sprinkler
- Added support for the Wyze Cam v3 Spotlight
- Added a motion detection zone & record sound toggle for Wyze Cam Outdoor
- Added support for Wyze Cam Outdoor motion-only scheduled local recordings
- Added support for the Base Station to connect over WiFi
- Added support for changing the name of Wyze Headphones
- Improved Map & Virtual Wall functions for Wyze Robot Vacuum
- Made vehicle & package detection available to all Cam Plus users
- Added product categories to help users find their device easily during setup
- Added support for Device and Device List widgets
- Optimized Wyze Plug and Wyze Plug Outdoor setup UI
- Fixed a bug that caused Wyze Band to connect instead of Wyze Watch devices
- Unified the device/platform feedback & support experience
- Bug fixes
2.16.55 (January 16, 2021)
- Added compatibility with cloud-side changes
- Optimized setup for Wyze Headphones
- Fixed a bug causing the Map to freeze for Wyze Robot Vacuum after an extended cleaning cycle
2.16.23 (December 16, 2020)
- Added support for Wyze Video Doorbell
- Added support for Wyze Thermostat
- Added support for Wyze Robot Vacuum
- Added support for Wyze Plug Outdoor
- Added support for Beta Program
- Added support for changing the Wyze account email
- Added the Home Monitoring tab
- Updated the Account tab UI
- Added support for Wyze Cam v3 to record videos when triggered by Wyze Sense
- Added the ability to control marketing messages in Wyze app
- Bug fixes
Note: This app may take a day to become available depending on the length of the app store review process.
2.15.51 (December 2, 2020)
- Fixed a bug that caused Wyze Headphones updates to take longer than expected
Note: This app may take a day to become available depending on the length of the app store review process.
2.15.21 (November 9, 2020)
- Added support for Wyze Cam v3
- Added support for Wyze Headphones
- Added support for fast forward for Cam Plus Event videos
- Added Wyze Band, Lock, and Scale to the bulk firmware update page
- Updated Wyze Support in the Account tab
- Added a WiFi/Bluetooth connection status to Wyze Lock
- Added the ability to set up and edit weight goals to Wyze Scale
- Bug fixes
Note: This app may become available to you later depending on when the app store releases it to the public.
2.14.35 (October 20, 2020)
- Fixed a bug that caused difficulty viewing the live stream with Android 11
2.14.33 (October 13, 2020)
General app:
- UI improvements for the bulk firmware update page
- Added a pop-up notification when manually rotating Wyze Cam Pan with Detection Zone enabled
- Added a running in the background option in the App Settings page
- Closed the Person Detection pilot
- Bug fixes
Wyze Band:
- Added a pop up reminder when a firmware upgrade is available
- Added a "mute when screen is on" function so that Wyze Band will stop vibrating and showing notifications when you are already processing those messages on your mobile device.
- UI improvements
2.13.119 (September 14, 2020)
- Fixed a bug that caused the Event page to go back to the top after viewing an Event video
- Fixed a bug that caused the location permission pop-up to occur repeatedly
- Fixed a bug that prevented new devices from being available in the Event filter
- Fixed the screen ratio for some devices with smaller screens
- Fixed a bug that prevented the live stream from progressing through 3/3 if the app was left on in the background
2.13.118 (September 9, 2020)
General App:
- Improved the Event page UI & Event filter
- Added support for backup 2FA phone number verification
- Added the ability to change Wyze Bulb settings without turning the bulbs on with Rules
Wyze Sense:
- Added support for low battery status & notification
Wyze Scale:
- Added support for pairing multiple scales to one account
- Added support for data export
Wyze Band:
- Added a Tool Box feature with Stopwatch and Flashlight
- Improved heart rate and sleep tracking accuracy
2.12.35 (August 17, 2020)
General App:
- Fixed a bug causing Cam Plus to not refresh after device setup
- Changed the default keyboard for login
- Adjusted the ratio for iPhone X
- Minor UI/UX improvements
Wyze Cam Outdoor:
- Fixed a Wyze Cam Outdoor bug that caused the app to show false success when disabling Travel Mode
- Fixed a bug that prevented some Wyze Cam Outdoor cameras from reading the microSD card
- Removed the photo access permission request when viewing the Wyze Cam Outdoor live stream
- Fixed a bug that prevented the Wyze Cam Outdoor thumbnail from updating
Wyze Cam v2 and Pan:
- Fixed an Album bug that prevented updating the Album after deleting a time lapse video
2.12.29 (July 29, 2020)
General App:
- Added the new Cam Plus service. Now you can use Person Detection with Complete Motion Capture!
- Added support for Wyze Cam Outdoor
Wyze Bulb:
- Added support for Sleep Routines
- Added a Reconnect button for if Wyze Bulb goes offline
Wyze Band Released Features:
- Added Google Fit and Apple Health data integration
Wyze Band Features Available After An Upcoming Firmware Update:
- Added a freestyle exercise mode
- Added support for 12hr/24hr time format change
- Added support for the red dot notification
Wyze Scale:
- Added Fitbit data integration
- Added trends for more body metrics
- Improved the algorithm
Wyze Lock:
- Added “Submit feedback” for guest accounts
- Added a warning for when there are over 50 passwords stored on the keypad
- Auto-unlock history now shows which user activated it
2.11.40 (June 10, 2020)
- Updated the Event page UI
- Added a new opened/closed door state notification for Wyze Lock
- Improved auto-unlock
- Bug fixes
Please note that Google has cautioned us to expect app reviews to take 7 days or longer during this time. If you do not see the update now, you should receive it in the next week or so.
2.10.80 (May 20, 2020)
- Fixed a timezone bug that caused an unnecessary notification for some users
Please note that Google has cautioned us to expect app reviews to take 7 days or longer during this time. If you do not see the update now, you should receive it in the next week or so.
2.10.74 (May 11, 2020)
- Fixed a bug causing a persistent notification for people not using Wyze Band
Please note that Google has cautioned us to expect app reviews to take 7 days or longer during this time. If you do not see the update now, you should receive it in the next week or so.
2.10.72 (May 7, 2020)
- Added support for the Emergency Button (Pilot)
- Improved Wyze Lock geofencing
- Improved UI for Wyze Band and Scale
- Bug fixes
Please note that Google has cautioned us to expect app reviews to take 7 days or longer during this time. If you do not see the update now, you should receive it in the next week or so.
2.10.36 (April 21, 2020)
- Added a TOTP option for 2FA
- Unified the log submission flow
- Added person detection support for Wyze Cam v1
- Added person detection support for RTSP firmware
- Improved the UI for the Home page
- Added an in-app rating
- Added support for Google Fit integration for Wyze Scale
- Bug fixes
We are pleased to say that the Wyze Cloud Person Detection AI beta is now available for all Wyze users. This is still considered a beta version because we have some further improvements in development.
Please note that Google has cautioned us to expect app reviews to take 7 days or longer during this time. If you do not see the update now, you should receive it in the next week or so.
2.9.70 (April 7, 2020)
- Fixed an issue preventing some tablets from seeing the app in Google Play
- Bug fixes
Please note that Google has cautioned us to expect app reviews to take 7 days or longer during this time. If you do not see the update now, you should receive it in the next week or so.
2.9.62 (March 31, 2020)
- Added support for Wyze Band
- Added support for Wyze Scale
- Bug fixes
Please note that Google has cautioned us to expect app reviews to take 7 days or longer during this time. If you do not see the update now, you should receive it in the next week or so.
2.9.30 (March 18, 2020)
- Fixed a bug that caused the live stream to freeze when using hardware decoder
- Bug fixes
Please note that Google has cautioned us to expect app reviews to take 7 days or longer during this time. If you do not see the update now, you should receive it in the next week or so.
2.9.29 (March 9, 2020)
- Added support for hardware decoder under App Settings
- Fixed auto-unlock accuracy bugs
- Fixed a lock status accuracy bug on the Home tab
- Other bug fixes
- Added support for our Cloud AI Person Detection beta. This will become available to a portion of customers and we will add people as we can while balancing the server load. If you would like to sign up for the waitlist, please fill out this form.
2.8.24 (January 27, 2020)
- Prepared for XNOR removal with the firmware upgrade
- Improved the device setup experience
- Added suggested device names
- Added "eject microSD card"
- Added keypad support for Wyze Lock
- Added power loss status recovery for Wyze Bulb
- Added recommendations to update very old Wyze Cam firmware
2.7.19 (December 17, 2019)
- Wyze Lock integration
- Deleting devices now removes Event videos from shared user accounts
- Event videos are now saved for 14 days even if the Wyze Cam is deleted
- Added in-app request to review Complete Motion Capture after free trial
- Removed the gray overlay from Event videos
- Fixed a bug preventing zooming in on Event videos
2.6.42
- Added Complete Motion Capture (learn more at http://services.wyze.com)
- Added overnight scheduling to Rules
- Added labels to Schedules and Device Triggers in Rules
- Added a conditional schedule for device trigger Rules
- Event videos are now available even if the Wyze Cam is removed from the account
- Improved sharing experience
- Added linking to Alexa from the Wyze app
- Added phone number input to Shop
- Added comment reply notifications for Shop and Discover
- Bug fixes
2.5.36
- Improved the video lag issue when viewing the live stream, Playback, or Event videos
- Security updates
2.5.30
- Fixed an issue may cause the app log to not generate when reporting an issue
2.5.29
- Fixed an issue that may cause failures when creating Schedules with end times
2.5.28
- Redesigned automation for lifestyle optimization with shortcuts, schedules, and device triggers
- Improved experience for sharing devices and managing shared devices
- Added support for Wyze Sense Bridge and Wyze Plug in firmware bulk upgrade
- Added product badges under Account tab
- Added support for Wyze Plug
- Fixed an issue that may cause mic permission use when the app is running in the background
2.4.82
- Added Person Detection. Your Wyze Cam can now detect people and send notifications when a person is detected. (latest firmware required, only Wyze Cam v2 and Pan are supported)
- Added 'Is left closed for' option for contact sensor notifications
- Added a status light toggle for Wyze Sense Bridge (latest firmware required)
2.4.24
- Added Wyze Bulb support
- Added group action support for Shortcuts
- Added thumbnails for notifications
- Added a comment feature in Discover
- Added a report feature in Discover
- Fixed the Wyze Cam Pan two-way audio issue on some Samsung phones
- Improved the experience for Wyze Cam Pan when connecting to a Bluetooth device
2.3.69
- Added grouping support for Wyze Sense
- Added sound for simultaneous streaming
- Added new triggers and actions for Wyze Sense in Shortcuts
- Fixed the screen hibernation issue when streaming individual cameras
2.3.16
- Added Two-Factor Authentication
- Added device on/off button to the Home page
- Added offline status
- Added a download button for Event videos
- Added support for RTSP (special firmware required)
- Added support for Wyze Sense
- Improved access for individual cameras during simultaneous streaming
2.2.38
- Added the ability to create camera groups
- Added the ability to stream multiple Wyze Cams at once through groups
2.1.31
- Added IR light control
- Added support for sorting and likes in Discover
- Added Early Access feature in Shop
- Optimized the log out issue when in poor internet connection
- Improved aspect ratios for devices that aren’t 16:9
- Fixed the zoom issue when enabling Hardware Decoder
- Bug fixes and experience improvements
2.1.27
- Allow bulk firmware upgrades through Account
- Support PayPal payment in Shop
- Improved experience for device setup and Forgot Password
- Improved experience when using Bluetooth devices
- Bug fixes
2.0.26
- Fixed an issue where some small screen devices were not seeing the "Sign up" link on the login screen
- Fixed a calendar bug in the Events tab
- Fixed a bug where setting up devices was causing the app to crash
2.0.23
- Changed device list design, 1 or 2 devices for tile view, 3 or more devices for list view
- Enlarged thumbnails in event list view
- Changed Do Not Disturb on/off text to Notifications off/on
- Added newsletter subscription UI in Accounts
- Removed 'Notification' info in device list page
- Fixed a hardware decoding crash on some Android 5.1 devices
- Bug fixes
1.5.44
- Fixed a bug that caused app crashes on Android Lollipop (5.0 and 5.1)
1.5.42
- Known issue: App crashes at the splash screen with Android OS 5.0 or 5.1. A fix is coming.
- Added the previous and next buttons in Playback to jump to events for "record on event" setting or skip time on "continuous recording" setting
- Added alert video thumbnails for Wyze Cam v2 and Pan
- Added WiFi signal strength in Device Info
- Added automation tasks and shortcuts in My Account
- Added double tap zoom
- Added 'show Wyze logo' toggle
- Added 360p option for Wyze Cam v2 and Pan cameras for slow internet connection
- Changed that shared users won't be able to view shared cameras immediately after share is canceled by main users.
- Changed that if the camera status is changed by one user, the camera status for all users
- with access will be updated.
- Fixed an issue that users can't toggle off all day in the alert schedule
- UI changes and other bug fixes
1.4.43
- Fixed a bug that camera settings weren’t saved correctly
- Fixed a bug that caused an empty alert video list
- Fixed an issue that caused refresh list error
- Other bug fixes
1.4.33
- Added turn on/off camera functionality
- Added ‘restart’ in camera setting page
- Moved the ‘Sort’ button to top right of device list
- Clicking on notification goes directly to alert video
- Add a prompt when receiving camera share
- Allow sending firmware log via app
- Add IP address in Device Info
- Added Wyze Newsletter subscription under Account page
- UI changes & bug fixes
1.3.162
- Added app support for Wyze Cam Pan
- New setup experience for Pan
- Pan/tilt support in live streaming
- New Motion Tracking feature
- New Pan Scan feature
- New two-way speaking for Pan
1.3.123
- Device sorting
- Motion Detection Zone (need firmware update)
- Swiping left/right to switch between alerts
- Adjusting motion/sound sensitivity from H/M/L to a 1-100 slider (need firmware update)
- Turning sound recording on/off (need firmware update)
- Switching to use Google notification service
- UI changes and bug fixes
- Minimum firmware requirements:
- Wyze Cam v2 – V4.9.1.42
- Wyze Cam v1 – V3.9.3.62
1.2.76
- Fixed the issue of 1-hour shift when setting an alert schedule
- Removed an unnecessary sound check when closing live view
1.2.71
- Updated Daylight Savings Time handling
- Bug fixes
1.2.58
- App update for Wyze Cam V2
- Fixed two timelapse download issues
- Enabled hardware decoding
- Bug fixes
1.2.50
- Simplified alert logic for better alert and notification stability
- Enable recording and pause/resume in playback
- Support screen rotation
- Multiple phones/tablets using the same Wyze account will all receive alert notifications. (In
- V1.1 only one device is notified)
- Option to turn on/off timestamp watermark in video frame
- Enable microSD card format
- Provide hardware decoding option
- Bug fixes
iOS App
2.42.0.24 (May 26, 2023)
- Added support for landscape mode on iPad for the Home tab
2.42.0.23 (May 25, 2023)
-
Experience improvements on iPad
-
Added support for Glass Breaking and Gun Shooting sound detection for Cam Protect customers
-
Added support for Smart Vision for Cam Protect customers
-
Added a reminder for Wyze Home Monitoring customers to check if a Permit Number is required by local authorities
-
Updated Security Camera logic in Home Monitoring so it displays the most recent footage of Motion, Person, or CO/Smoke Events of cameras used for Wyze Home Monitoring
-
Added support for auto-renew for Cam Plus customers who want to enable it in the app
-
Bug fixes
2.41.5.5 (April 26, 2023)
- Added a control for the Wyze app notification sound under Push Notification Settings
- Added support for Cam Protect in Canada
- Optimized the services onboarding user experience
- Optimized Event thumbnail information for customers without subscriptions
- Bug fixes
2.41.0.28 (April 18, 2023)
- Changed the notification sound for Wyze notifications so that they’re different than standard phone notification tones
- Added support for an Event label for microSD card Playback for Wyze Cam OG
- Added support for an enhanced global notification setting with a snooze function
- Added support for showing the same SSID for combined 2.4 GHz and 5 GHz bands separately
- Moved app security settings to Account > My Account in the Wyze app
- Improved UI/UX for the Rule Action list
- Improved the stability and workflow for Cam Protect
- Optimized the Service page user experience and Cam Plus in-app purchase flow
- Bug fixes
2.40.0.15 (March 8, 2023)
- Added Rules support for Wyze Home Monitoring to use Mode changes and critical events as triggers to control your Wyze devices
- Added support for Additional PIN that allows 10 additional PIN for Wyze Home Monitoring (firmware update required)
- Improved Shortcut Rules UI/UX
- Fixed a bug that prevented the removal of previous Wyze Thermostats
- Fixed a landscape aspect ratio issue on iPad
- Fixed a bug that caused Location Trigger names to display incorrectly in Rules
- Fixed an aspect ratio issue in the tab bar
- Bug fixes
2.39.0.20 (February 14, 2023)
- Added a Request Dispatch icon on the live stream for Wyze Cam v2, v3, Pan, and Pan v2 that Cam Protect subscribers can use
- Updated the Rules description for inverse actions
- Optimized camera groups
- Bug fixes
2.38.4.3 (January 11, 2023)
- Fixed a bug that frequently caused Error Code -1 when viewing camera groups
2.38.3.3 (January 5, 2023)
- Improved the camera group experience
- Bug fixes
2.38.2.1 (December 22, 2022)
- Fixed the incorrect beta tag in the app name
2.38.1(28) (December 21, 2022)
- Fixed a crash that happened on the Home tab for some users
- Fixed a broken in-app purchase link on Event Video pages
Note: This app version will say WyzeBeta though it is not a beta release. We apologize and will submit a new version with the updated name tomorrow.
2.38.0.27 (December 15, 2022)
- Added support for email Two-Factor Authentication (2FA)
- Added a new Wyze Cam onboarding with a Cam Plus free trial and opt-out option
- Added Santa holiday AI detection to keep the magic alive
- Added the ability to hold the Request Dispatch button in the Monitoring tab to immediately call for help
- Removed the video verification process for Cam Protect armed systems in Test Mode
- Improved UI in Rule Settings
- Added validation to check if the Wyze app has authorization for notifications and Critical Alerts for Wyze Home Monitoring
- Bug fixes
2.37.2.1 (November 28, 2022)
- Fixed an issue that prevented Canadian users from setting up Wyze Home Monitoring
2.37.1.1 (November 21, 2022)
- Fixed a bug that caused the camera Live page to show a black screen in landscape mode
- Fixed a bug that caused sound in motion Event Videos for Wyze Video Doorbell Pro if it’s muted for the first time
2.37.0(12) (November 17, 2022)
- Cam Plus Pro is now Cam Protect!
- Added a new alarm flow to Cam Protect that allows Noonlight agents to verify the video to help determine if there is a real threat
- Added Rule Explore Tab to help customers explore how Wyze devices can work together to make your home smarter
- Optimized the camera onboarding flow for Cam Plus users to improve the license binding experience
- Fixed a bug that prevented sound when playing 12-second Cam Plus Lite videos
- Fixed a bug that prevented Notification options from being selected correctly in Smart Support Tool
- Fixed a bug that prevented users from adding devices to Smart Control on Wyze Switch
- Fixed a bug that caused AI filters to stay in Events even if the app is closed
- UI improvements
- Bug fixes
2.36.0.14 (November 1, 2022)
- Added support for Wyze Cam v3 Pro
-
Added support for Canadian addresses to enable Wyze Home Monitoring in Canada
-
Added AI Notifications for Wyze Cam v2, Wyze Cam v3, Wyze Cam Pan v1, and Wyze Cam Pan v2 with a firmware update to limit notifications to Events you care about
-
Added AI-only Events recording options for Wyze Cam v2, Wyze Cam v3, Wyze Cam Pan v1, and Wyze Cam Pan v2 on the latest firmware to allow control over what Events you want recording
-
AI notification and recording minimum firmware versions:
-
Wyze Cam v2 → 4.9.9.1273 and above
-
Wyze Cam v3 → 4.36.10.2000 and above
- Wyze Cam Pan v1 → 4.10.9.1273 and above
-
Wyze Cam Pan v2 → 4.49.3.2000 and above
-
2.35.0.13 (September 29, 2022)
- Cam Plus Pro is now supported on Wyze Cam Pan v2
- Added support for Wyze Light Strip and Wyze Light Strip Pro effects outside of Music Mode
- Added support for Wyze Bulb and Wyze Bulb Color effects outside of Music Mode when grouped with Wyze Light Strip or Wyze Light Strip Pro
- Updated the Wyze Cam v3/Wyze Video Doorbell Pro Device Notification and Event Recording pages to remove inconsistencies
- Fixed an inconsistency between the web and app versions of the Wyze Thermostat compatibility checker
- Minor UI improvements
- Bug fixes
2.34.1.1 (September 1, 2022)
- Fixed a bug that prompted an app update when the app is on the most recent version
2.34.0.15 (August 24, 2022)
- Added support for a delay between a person being detected on an armed camera and an alarm being triggered
- Added support for Home/Away in Preset Rules
- Added support for product search in Shop
- Added support for Wyze Home Monitoring to Wyze Widgets
- Added support for manual recording for adults to Wyze Scale S and Wyze Scale X
- Added Wyze Cam Outdoor v1 and v2 compatibility to Smart Support Tool
- Updated the Monitoring tab setup flow for accounts with a Cam Plus Pro license
- Fixed a bug that caused the Playback entrance in Events to not work for some people
- Bug fixes
2.33.0.17 (July 21, 2022)
- Added support for arming and disarming Cam Plus Pro devices using day/time schedules
- Added more diagnostics for some commonly reported issues in the Smart Support Tool
- Improved thumbnail image messaging
- Fixed a bug that prevented the garage door status from refreshing automatically in the Home tab
- Fixed a Cam Plus free trial bug
- Bug fixes
2.32.0.20 (June 16, 2022)
- Added support for Wyze Home Monitoring Emergency Contacts. Trusted friends and family members can be added to the list for additional security.
- Added support for turning on Power and Lighting devices for X minutes as an action in Rules
- Added a new Preset Rule that turns on lights if a person is detected with Cam Plus
- Added additional Scenes for lighting products
- Added support for Muscle Mass Rate and Pet Mode in Wyze Scale S and Wyze Scale X
- Optimized the map display for Wyze Robot Vacuum
- Fixed a bug that prevented Cam Plus Lite devices from using AI triggers in Rules
- Fixed a typo in the Wyze Air Purifier installation instruction
- Bug fixes
Note: This app version and newer requires iOS 14.
2.31.1.0 (May 23, 2022)
- Fixed a bug that prevented updating phone numbers for Cam Plus Pro
2.31.0.7 (May 18, 2022)
- Added support for Wyze account deletion
- Added support for grouping all Wyze lighting family products
- Added Monitoring Schedule control toggles to allow pausing schedules for Wyze Home Monitoring
- Added support for Wyze Cam Outdoor v2 in Wyze Home Monitoring (the Security Camera feature fix will be released later)
- Added support for a Smart Support tool under Wyze Support to self diagnose device configuration issues (works only for Wyze Cam v3 with a Cam Plus license for now)
- Added links to the Wyze communities
- Improved the device sharing experience with people who don’t have Wyze accounts yet
- Fixed a Wyze Cam Outdoor bug that prevented Settings from loading correctly
2.30.1.10 (May 11, 2022)
- Opened Cam Plus Pro to the public
- Shop now uses the same platform as our website and the checkout experience has been adjusted
- Fixed a grouping bug for Wyze Cam Outdoor that prevented the live stream from loading or mixed up camera names
- Bug fixes
2.30.0.14 (April 20, 2022)
- Added support for Wyze Air Purifier (code merged in the 2.29 app)
- Added support for Luggage Mode for Wyze Scale S
- Added a 5-star rating in Cleaning History for Wyze Robot Vacuum
- Added an FAQ page in Wyze Robot Vacuum Settings
- Modified the date range for Export Data, Heart Rate measurement, and Set Goal for Wyze Scale S
- Fixed a bug that showed incorrect cooldown options for Wyze Cam Outdoor with Cam Plus
2.29.2 (April 8, 2022)
- Fixed a bulk update bug that would cause firmware updates to be available without following update order logic
- Fixed a bug that caused Wyze Cam Outdoor to report incorrect status for microSD cards in the Base Station
2.29.1 (March 28, 2022)
- Moved Cam Plus Lite’s position on the Services page to be easier to find
- Removed the Cam Plus banner shown under snapshot Events and replaced it with a more contextually dynamic banner
- Improved the Cam Plus license activation experience
- Fixed an AI sound detection toggle bug
2.29.0 (March 16, 2022)
General App:
- Added support for Wyze Gun Safe
Wyze Video Doorbell Pro:
- Added an additional field of view option for Wyze Video Doorbell Pro
Wyze Robot Vacuum:
- Improved the Schedules page for Wyze Robot Vacuum
- Added Smart Schedule recommendations based on cleaning activities for Wyze Robot Vacuum
Wyze Scale S:
- Added a new real-time camera review to help locate the correct camera lens for heart rate measurement for Wyze Scale S
- Added a custom date range option for data export for Wyze Scale S
Wyze Home Monitoring:
- Added permit number support. If your local enforcement requires it, please apply for a monitoring permit and fill in the permit number in Home Monitoring Settings. Failing to do so may result in a refusal to dispatch from the police.
- Added dispatch instructions support. If the entrance to your home is hard to navigate through, add dispatch instructions for quicker arrival.
Cam Plus:
- Added Cam Plus auto-activation for bundle devices during device setup
Cam Plus Pro:
- Updated the onboarding steps for new Cam Plus Pro users
2.28.2 (March 7, 2022)
- Added support for Cam Plus Lite
- Added support for thumbnail images for Wyze Cam Events for compatible cameras. Video clips are still available for devices using Cam Plus Lite.
2.28.0 (January 26, 2022)
-
Redesigned the Shop tab to be the single best place to shop for Wyze products
-
New limited-time Flash Sales let you score Wyze products at prices not possible before
-
Added support for Subscriber Discounts for those with Cam Plus and Cam Plus Pro
-
Added support for exclusive app shop coupons
-
Sorted products into categories to make browsing easier
-
New and popular products are now featured on the Shop tab’s main page
-
Added support for tracking shipped orders
-
Moved My Orders out of the Account tab and into the Shop tab
-
Added 30-second rewind and skip forward buttons in microSD card Playback for a better scrubbing/searching experience
-
Added the ability to group Wyze Bulb White and Wyze Bulb Color with Wyze Light Strip
-
Added support for multiple contact numbers in Wyze Home Monitoring for Noonlight to confirm alarms with shared users
-
Added the ability to group Wyze Sense Climate Sensors
-
Added individual AI notification toggles for Events with people, vehicles, packages, and pets detected
-
Updated the Cam Plus Free Trial UI
-
Bug fixes
2.27.37 (January 18, 2022)
- Added support for Person Detection on more devices
2.27.34 (January 6, 2022)
- Added support for Person Detection on more devices
More information coming soon!
2.27.33 (January 3, 2022)
- Fixed a crash issue on iOS 12
2.27.32 (December 21, 2021)
- Added Voice Over IP support for Wyze Video Doorbell
- Added support for Rule recommendations
- Added support for sharing Wyze Home Monitoring with people you trust
- Added Sunrise/Sunset support for Wyze Lamp Socket
- Added ceiling mount instructions for Wyze Cam Floodlight
- Added a non-living things option in Baby/Pet Mode for Wyze Scale S
- Added Wyze Plug and Wyze Plug Outdoor to the bulk update page
- Added 5 Christmas song tones for Wyze Video Doorbell Pro
- Updated app Sync Time to be compatible with old and new camera firmware versions
- Improved instructions for measuring heart rate for Wyze Scale S
- Fixed a firmware update bug for Wyze Plug Outdoor
- Fixed a Schedule setting bug for Wyze Plug Outdoor
- Fixed a bug that caused Shortcuts to disappear
- Fixed a crash issue for Wyze Band when tapping on the heart in Activity
Note: This app is being gradually released. If you do not see it now, you should see it later this week.
2.26.21 (November 11, 2021)
- Added support for Wyze Video Doorbell Pro
- Added support for Wyze Cam Lamp Socket
- Added support for Wyze Cam Floodlight
- Added support for heart rate measurement for Wyze Scale S
- Added support for a beta tag for beta firmware in individual and bulk firmware update views
- Make Your Voice Heard in Home Monitoring Settings welcomes you to give us feedback and learn what we are developing for you
- Bug fixes
2.25.32 (November 3, 2021)
- Added support for Wyze Watch 47mm C
2.25.21 (October 13, 2021)
2.24.52 (September 16, 2021)
- Added support for Wyze Light Strip
- Added support for Wyze Light Strip Pro
- Added Trends for Wyze Home Monitoring to show how you use the service to protect the things you care about
- Added support for Wyze Home Monitoring users to change names in Monitoring Settings after setup
- Lifted the mandatory Keypad + one sensor limit for Wyze Home Monitoring Sense Hub setup
- Added the ability to set up Wyze Home Monitoring from the Home tab Add Device page
- Added a Mic Noise Reduction toggle for Wyze Buds
- Changed the "Energy" EQ mode to "Sport" for Wyze Buds
- Bug fixes
2.24.36 (September 8, 2021)
-
Fixed a bug that prevented connecting to the Wyze Cam Outdoor Base Station using WiFi
2.24.34 (September 1, 2021)
- Added support for Wyze Buds
- Added support for Sunrise/Sunset in Rules (This update is being sent to a limited number of users at first and will be more widely available later.)
- Added support for Wyze Leak and Climate Sensors in Rules (This update is being sent to a limited number of users at first and will be more widely available later.)
- Added support for Wyze Leak and Climate Sensors for Wyze Home Monitoring
- Redesigned Wyze Bulb UI
- Added a Wyze Lock button to the Wyze Video Doorbell page
- Added more detail options such as a tree or crop types and growth stages to Wyze Sprinkler Controller Smart Schedules
- Optimized the in-app purchase experience
- Fixed a bug that prevented executing Wyze Bulb scenes created in older app versions
- Fixed a bug that prevented Wyze Cam v3 videos stored in Album from being opened
- Fixed a pairing bug for Wyze Leak Sensor
- Fixed an AI settings bug for Wyze Cam Outdoor
- Bug fixes
2.23.23 (August 12, 2021)
- Fixed a bug that prevented the full descriptions of Wyze Scale metrics from displaying
- Fixed a bug that prevented Wyze Buds Pro from pairing
- Fixed a bug that prevented users from purchasing an annual subscription in the app
2.23.21 (August 4, 2021)
- Added support for Wyze Buds Pro
- Added support for Wyze Leak Sensor
- Added support for Wyze Climate Sensor
- Added support for location-based Rules triggers based on arrival or departure from a location
- Added support for unlocking Wyze Lock from the Wyze Video Doorbell page
- Added support for repeat schedules for Wyze Sprinkler Controller
- Added animation playback and sharing for Wyze Robot Vacuum
- Added weight comparison to the Wyze Scale page
- Prevented firmware updates when Wyze Cam Outdoor has low battery
- Fixed an issue that prevented Wyze Cam Outdoor Base Station setup
- Fixed a bug that displayed the 12s limit icon for Cam Plus users in Sound Events
- Bug fixes
Note: The location-based Rules triggers are being rolled out gradually. If you do not have it available today, you should get access in the next 3 weeks.
2.22.32 (July 28, 2021)
- Changed minimum app operating system (OS) compatibility from iOS 9.0+ to 12.0+
- Security improvements
- Bug fixes
Note: The minimum OS change will not affect apps already downloaded onto your device. If your operating system is below the threshold, you will not be able to see future app updates in the app store. This change is being made to support upcoming security changes and features. We encourage you to update your OS at your earliest opportunity and apologize for any inconvenience.
2.22.21 (July 12, 2021)
- Improved the Message Center
- Added an SMS option for Wyze News and Promos
- Optimized Device List UI
- Added Wyze Watch 44 and 47mm to the bulk firmware update page
- Optimized Wyze Floor Lamp setup logic and Device tab UI
- Security improvements
- Bug fixes
2.21.35 (June 16, 2021)
- Updated the button design for non-subscribers in the Monitoring tab
2.21.33 (June 14, 2021)
- Added Siren support and a Battery Usage Summary for Wyze Cam Outdoor (requires Wyze Cam Outdoor firmware version 4.17.1.123 and Base Station: 4.16.2.7)
- Added a low battery indicator for Wyze Sense v2
- Added a Vacation Mode indicator for Wyze Bulb Color
- Added support for Wyze Lock Google Home integration
- Improved Smart Schedule for Wyze Sprinkler Controller
- Enabled no-go zone rotation for Wyze Robot Vacuum
- Enabled app sorting for Wyze Watch 44mm
- Enabled bulk editing schedules for Wyze Floor Lamp
- Fixed a bug that displayed the 12s limit icon for Cam Plus users
- Fixed an audio loss bug for Wyze Cam v2 and Pan manually recorded videos
- Bug fixes
2.20.142 (May 12, 2021)
General App:
- Added support for Wyze Floor Lamp
- Added a red dot indicator for beta users when a new product enters Beta Program
- Added support for phone numbers changes in Wyze Home Monitoring
- Fixed a bug that prevented iOS users from going through the setup flow after resetting Wyze Home Monitoring
- UI improvements
- Bug fixes
Wyze Thermostat (firmware update required):
- Added support for Fan Activation Delay
- During Auto mode, when the user sets a heating and cooling temperature difference less than 5°F, the temperature will change automatically when either one is changed
- Moved Fan Cycle to Advanced Settings and added further in-app information
- The Fan Cycle interval is now changed to 0-30 min/hour. The default value is 0 min/hour
Wyze Video Doorbell (firmware update required):
- Added support for Quick Replies for Wyze Video Doorbell
2.19.24 (April 20, 2021)
- Improved the update instructions for Wyze Sense Keypad
- Fixed a bug that caused the camera to trigger false alarms for Wyze Home Monitoring
2.19.22 (April 8, 2021)
- Added support for a custom motion detection zone for Wyze Cam v3 (future firmware update required)
- Added support for Wyze Cam being used as a zone image for Wyze Sprinkler
- Enabled room selection when idle and disabled room selection when cleaning for Wyze Robot Vacuum
- Improved map creation and management for Wyze Robot Vacuum
- Improved the setup process for Wyze Video Doorbell
- Fixed a time zone setting bug for Wyze Bulb Color schedules
- Fixed a bug that caused the app to crash when bulk updating Wyze Plug Outdoor
- Fixed a bug that caused inconsistency in the Beta Program product list
- Fixed incorrect personal information for Wyze Watch 47mm
- Fixed a bug that continued to prompt Wyze Home Monitoring firmware updates when fully updated
- Fixed a bug that prevented Wyze Cam Outdoor’s Base Station from connecting to WiFi if the SSID has a special character
- Fixed a bug that caused app crashes when viewing Wyze Video Doorbell in landscape mode (iOS 13 and below)
2.18.44 (March 31, 2021)
- Updated the Wyze Cam Outdoor location popup to only occur when using Travel Mode
2.18.43 (March 25, 2021)
- Added support for Home Monitoring Service
- Added support for Wyze Entry Sensor v2
- Added support for Wyze Motion Sensor v2
- Added support for Wyze Sense Hub
- Added support for Wyze Sense Keypad
- Added support for Home hub
- Reduced static sound when using iOS to view Wyze Cam v3 live streams
2.18.23 (March 12, 2021)
- Fixed a service purchase issue
2.18.21 (March 9, 2021)
- Added support for Wyze Bulb Color
- Added support for a detection zone for Wyze Video Doorbell (firmware update required)
- Modified the map drag range for Wyze Robot Vacuum
- Added Wyze Support to the Wyze Robot Vacuum Settings page
- Bug fixes
2.17.42 (February 24, 2021)
- Fixed a bug that prevented Wyze Robot Vacuum users from dragging the map
- Fixed a bug that prevented Wyze Robot Vacuum users from dividing rooms
- Bug fixes
2.17.21 (January 26, 2021)
- Added support for Wyze Sprinkler
- Added support for the Wyze Cam v3 Spotlight
- Added a motion detection zone & record sound toggle for Wyze Cam Outdoor
- Added support for Wyze Cam Outdoor motion-only scheduled local recordings
- Added support for the Base Station to connect over WiFi
- Added support for changing the name of Wyze Headphones
- Improved Map & Virtual Wall functions for Wyze Robot Vacuum
- Made vehicle & package detection available to all Cam Plus users
- Added product categories to help users find their device easily during setup
- Added support for Device and Device List widgets
- Optimized Wyze Plug and Wyze Plug Outdoor setup UI
- Fixed a bug that caused Wyze Band to connect instead of Wyze Watch devices
- Unified the device/platform feedback & support experience
- Bug fixes
2.16.48 (January 22, 2021)
- Fixed an issue that prevented Wyze Robot Vacuum setup
2.16.46 (January 16, 2021)
- Added compatibility with cloud-side changes
- Fixed the bug causing a freeze in the landing page after extended time without using the Wyze app
- Optimized the Event video player
- Moved map editing to the Settings page for Wyze Robot Vacuum
- Optimized Map editing & UI for Wyze Robot Vacuum
2.16.25 (December 22, 2020)
- Fixed a bug which set the wrong time for Device Trigger Rules
Note: This app may take a day to become available depending on the length of the app store review process.
2.16.23 (December 16, 2020)
- Added support for Wyze Video Doorbell
- Added support for Wyze Thermostat
- Added support for Wyze Robot Vacuum
- Added support for Wyze Plug Outdoor
- Added support for Beta Program
- Added support for changing the Wyze account email
- Added the Home Monitoring tab
- Updated the Account tab UI
- Added support for Wyze Cam v3 to record videos when triggered by Wyze Sense
- Added the ability to control marketing messages in Wyze app
- Bug fixes
Note: This app may take a day to become available depending on the length of the app store review process.
2.15.51 (December 2, 2020)
- Fixed a bug that caused Wyze Headphones updates to take longer than expected
Note: This app may take a day to become available depending on the length of the app store review process.
2.15.41 (November 18, 2020)
- Improved Wyze Cam v3 connectivity
- Add support for Wyze Cam v3 to record videos when triggered by Wyze Sense
- Bug fixes
Note: This app may become available to you later depending on when the app store releases it to the public.
2.15.22 (November 9, 2020)
- Added support for Wyze Cam v3
- Added support for Wyze Headphones
- Added support for fast forward for Cam Plus Event videos
- Added Wyze Band, Lock, and Scale to the bulk firmware update page
- Updated Wyze Support in the Account tab
- Added a WiFi/Bluetooth connection status to Wyze Lock
- Added the ability to set up and edit weight goals to Wyze Scale
- Bug fixes
Note: This app may become available to you later depending on when the app store releases it to the public.
2.14.23 (October 21, 2020)
- Added support for syncing time to cameras in Australia and New Zealand
- Fixed a bug preventing Wyze Band from linking to Alexa
2.14.22 (October 13, 2020)
General app:
- UI improvements for the bulk firmware update page
- Added a pop-up notification when manually rotating Wyze Cam Pan with Detection Zone enabled
- Closed the Person Detection pilot
- Fixed Wyze Bulb and Wyze Plug setup failure issues with iOS 14 devices
- Bug fixes
Wyze Band:
- Added a pop up reminder when a firmware upgrade is available
- Added instructions for how to keep the Wyze app live in the background for Wyze Band data transmission
- UI improvements
2.13.22 (September 16, 2020)
- Fixed a bug that may cause a camera to show a solid, yellow light after an upgrade
2.13.21 (September 9, 2020)
General App:
- Improved the Event page UI & Event filter
- Added support for backup 2FA phone number verification
- Added the ability to change Wyze Bulb settings without turning the bulbs on with Rules
Wyze Sense:
- Added support for low battery status & notification
Wyze Scale:
- Added support for pairing multiple scales to one account
- Added support for data export
Wyze Band:
- Added a Tool Box feature with Stopwatch and Flashlight
- Improved heart rate and sleep tracking accuracy
2.12.51 (August 20, 2020)
- Fixed a bug that prevented some users from logging in after logging out of the Wyze app
2.12.50 (August 17, 2020)
General App:
- Fixed a bug causing Cam Plus to not refresh after device setup
- Changed the default keyboard for login
- Adjusted the ratio for iPhone X
- Minor UI/UX improvements
Wyze Cam Outdoor:
- Fixed a Wyze Cam Outdoor bug that caused the app to show false success when disabling Travel Mode
- Fixed a bug that prevented some Wyze Cam Outdoor cameras from reading the microSD card
- Removed the photo access permission request when viewing the Wyze Cam Outdoor live stream
- Fixed a bug that prevented the Wyze Cam Outdoor thumbnail from updating
Wyze Cam v2 and Pan:
- Fixed an Album bug that prevented updating the Album after deleting a time lapse video
2.12.31 (August 4, 2020)
- Fixed a Wyze Band connection bug
2.12.30 (July 29, 2020)
General App:
- Added the new service "Cam Plus". Now you can use Person Detection with Complete Motion Capture!
- Added support for Wyze Cam Outdoor
Wyze Bulb:
- Added support for Sleep Routines
- Added a Reconnect button for if Wyze Bulb goes offline
Wyze Band:
- Added Google Fit and Apple Health data integration
Wyze Band Features Available After An Upcoming Firmware Update:
- Added a freestyle exercise mode
- Added support for 12hr/24hr time format change
- Added support for the red dot notification
Wyze Scale:
- Added Fitbit data integration
- Added trends for more body metrics
- Improved the algorithm
Wyze Lock:
- Added “Submit feedback” for guest accounts
- Added a warning for when there are over 50 passwords stored on the keypad
- Auto-unlock history now shows which user activated it
2.11.41 (June 10, 2020)
- Updated the Event page UI
- Added a new opened/closed door state notification for Wyze Lock
- Improved auto-unlock
- Bug fixes
Please note that app reviews are taking longer during this time. If you do not see the update now, you should receive it in the next week or so.
2.10.72 (May 7, 2020)
- Added support for the Emergency Button (Pilot)
- Improved Wyze Lock geofencing
- Improved UI for Wyze Band and Scale
- Bug fixes
Please note that app reviews are taking longer during this time. If you do not see the update now, you should receive it in the next week or so.
2.10.62 (April 21, 2020)
- Added a TOTP option for 2FA
- Unified the log submission flow
- Added person detection support for Wyze Cam v1
- Added person detection support for RTSP firmware
- Improved the UI for the Home page
- Added an in-app rating
- Bug fixes
We are pleased to say that the Wyze Cloud Person Detection AI beta is now available for all Wyze users. This is still considered a beta version because we have some further improvements in development.
Please note that app reviews are taking longer during this time. If you do not see the update now, you should receive it in the next week or so.
2.9.58 (April 7, 2020)
- Added support for Apple Health for Wyze Scale
- Bug fixes
Please note that app reviews are taking longer during this time. If you do not see the update now, you should receive it in the next week or so.
2.9.56 (March 31, 2020)
- Added support for Wyze Band
- Added support for Wyze Scale
- Bug fixes
Please note that app reviews are taking longer during this time. If you do not see the update now, you should receive it in the next week or so.
2.9.24 (March 10, 2020)
- Fixed a Daylight Savings Time bug that removed March 8 from Event list
2.9.23 (March 9, 2020)
- Fixed auto-unlock accuracy bugs
- Fixed a lock status accuracy bug on the Home tab
- Other bug fixes
- Added support for our Cloud AI Person Detection beta. This will become available to a portion of customers and we will add people as we can while balancing the server load. If you would like to sign up for the waitlist, please fill out this form.
2.8.20 (January 27, 2020)
- Prepared for XNOR removal with the firmware upgrade
- Improved the device setup experience
- Added suggested device names
- Added "eject microSD card"
- Added keypad support for Wyze Lock
- Added power loss status recovery for Wyze Bulb
- Added recommendations to update very old Wyze Cam firmware
2.7.29 (December 17, 2019)
- Wyze Lock integration
- Deleting devices now removes Event videos from shared user accounts
- Event videos are now saved for 14 days even if the Wyze Cam is deleted
- Added in-app request to review Complete Motion Capture after free trial
- Removed the gray overlay from Event videos
- Fixed a bug preventing zooming in on Event videos
2.6.62
- Added Complete Motion Capture (learn more at http://services.wyze.com)
- Added overnight scheduling to Rules
- Added labels to Schedules and Device Triggers in Rules
- Added a conditional schedule for device trigger Rules
- Event videos are now available even if the Wyze Cam is removed from the account
- Improved sharing experience
- Added linking to Alexa from the Wyze app
- Added phone number input to Shop
- Added comment reply notifications for Shop and Discover
- Bug fixes
The first version was 2.6.61 but we put out another version because we needed to switch a URL from the beta server to production. Sorry for the inconvenience!
2.5.53
- Added location permission pop up for IOS 13
2.5.45
- Redesigned automation for lifestyle optimization with shortcuts, schedules, and device triggers
- Improved experience for sharing and managing shared devices
- Added support for Wyze Sense Bridge and Wyze Plug in firmware bulk upgrade
- Added product badges under Account tab
- Added support for Wyze Plug
2.4.73
- Fixed a bug causing an issue in Shop.
2.4.65
- Added Person Detection. Your Wyze Cam can now detect people and send notifications when a person is detected. (latest firmware required, only Wyze Cam v2 and Pan are supported)
- Added 'Is left closed for' option for contact sensor notifications
- Added a status light toggle for Wyze Sense Bridge (latest firmware required)
2.4.30
- Added Wyze Bulb support
- Added group action support for Shortcuts
- Added thumbnails for notifications
- Added a comment feature in Discover
- Added a report feature in Discover
- Fixed an issue that may cause unexpected logout
2.3.69
- Added grouping support for Wyze Sense
- Added sound for simultaneous streaming
- Added new triggers and actions for Wyze Sense in Shortcuts
- Fixed a bug causing the live stream to lose audio after reconnecting
2.3.25
- Added Two-Factor Authentication
- Added device on/off button to the Home page
- Added offline status
- Added a download button for Event videos
- Added support for RTSP (special firmware required)
- Added support for Wyze Sense
- Improved access for individual cameras during simultaneous streaming
2.2.40
- Added the ability to create camera groups
- Added the ability to stream multiple Wyze Cams at once through groups
2.1.32
- Added IR light control
- Added support for sorting and likes in Discover
- Added Early Access feature in Shop
- Optimized the log out issue when in poor internet connection
- Bug fixes and experience improvements
2.1.21
- Allow bulk firmware upgrades through Account
- Support PayPal payment in Shop
- Improved experience for device setup and Forgot Password
- Fixed app download incompatibility issue on some devices
- Bug fixes
2.0.21
- Fixed an issue where Event Videos were showing MAC addresses as camera name
- Fixed the Events tab that was showing MAC addresses as camera name
- Fixed a bug that two cameras from the same account sometimes mixed up Event Videos
- Fixed a bug where watching Discover videos may cause the app to crash
- Improved the "Forgot Password" experience
2.0.18
- Brand new user experience for Home page (renamed from Devices page)
- Brand new user experience for Events page (renamed from Notifications page)
- New Discover section featuring community video content
- New Shop section for in-app Wyze product purchase
- Allow turning on/off notifications per camera
- Added 'Device Sharing' in Account page Added 'Order History' in Account page
- Updated 'Help & Feedback' user experience
- Bug fixes
1.5.52
- Fixed a bug that the wrong message is displayed in creating a time-lapse video
1.5.51
- Fixed a bug that caused app crashes at splash screen on some iOS versions (10.3.3, 9.5.3, 9.3.5)
1.5.50
- Added the previous and next buttons in Playback to jump to events for "record on event" setting or skip time on "continuous recording" setting
- Added alert video thumbnails for Wyze Cam v2 and Pan
- Added WiFi signal strength in Device Info
- Added automation tasks and shortcuts in My Account
- Added double tap zoom
- Added 'show Wyze logo' toggle
- Added 360p option for Wyze Cam v2 and Pan cameras for slow internet connection
- Changed that shared users won't be able to view shared cameras immediately after share is canceled by main users
- Changed that if the camera status is changed by one user, the camera status for all users with access will be updated Fixed an issue that iOS app will crash for extended use.
- Fixed an issue that users can't toggle off all day in the alert schedule
- UI changes and other bug fixes
1.4.48
- Added turn on/off camera functionality
- Added ‘restart’ in camera setting page
- Moved the ‘Sort’ button to top right of device list
- Clicking on notification goes directly to alert video
- Add a prompt when receiving camera share
- Allow sending firmware log via app
- Add IP address in Device Info
- Fixed an issue that WiFi change to LTE lost camera connection (Only for iOS app)
- Added Wyze Newsletter subscription under Account page
- UI changes & bug fixes
1.3.152
- Fixed a crash when disconnecting a camera
1.3.150
- Added app support for Wyze Cam Pan
- New setup experience for Pan
- Pan/tilt support in live streaming
- New Motion Tracking feature
- New Pan Scan feature
- New two-way speaking for Pan
1.3.134
- Fixed an issue that caused app crashes when live streaming
- Alert notifications now take the user directly to the videos instead of the alert video list
- Added clear cache option
- Remember user’s last alert schedule setting that is not all day
- Some UI changes
- Other bug fixes
1.3.116
- Device sorting
- Motion Detection Zone (need firmware update)
- Swiping left/right to switch between alerts
- Adjusting motion/sound sensitivity from H/M/L to a 1-100 slider (need firmware update)
- Turning sound recording on/off (need firmware update)
- UI changes and bug fixes
- Minimum firmware requirements:
- Wyze Cam v1 – V3.9.3.62
- Wyze Cam v2 – V4.9.1.42
1.2.84
- Updated Daylight Savings Time handling for shared cameras
1.2.82
- Updated Daylight Savings Time handling
- Bug fixes
1.2.72
- App update for Wyze Cam v2
- Reduced video lag for older iOS devices
- Bug fixes
1.2.60
- Enable recording and pause/resume in playback
- Support screen rotation
- Support microSD card format
- Provide option to turn on/off timestamp watermark in video frame
- Multiple phones/tablets logged in during past 7 days using the same Wyze account will all receive alert notifications. (In V1.0 and V1.1 only one device is notified.)
- Wyze app audio output to Bluetooth speaker
- Bug fixes
Wyze Firmware
Learn more about how to update a device's firmware by clicking here.
Wyze Video Doorbell Pro Firmware
- Added support for unlocking Wyze Lock Bolt from the Wyze Video Doorbell Pro live stream
1.0.68 (July 25, 2022)
- Improved connection stability
- Fixed an AC power supply status bug
1.0.66 (June 13, 2022)
- Fixed a time zone bug that caused some regions to be set an hour ahead
1.0.64 (March 30, 2022)
- Added support for default Quick Responses
- Added support for motion detection zones
- Increased detection sensitivity to 5 levels
- The doorbell will now sleep if the live stream is left on for more than 20 minutes when using the battery
- Optimized Event uploading logic
1.0.62 (February 23, 2022)
- Audio from both sides of the conversation will be recorded instead of only the doorbell side
- Improved echo cancellation to reduce noise when using 2-way audio
1.0.60 (February 14, 2022)
- Ringing the doorbell is no longer included in motion detection cooldown
- The default motion detection sensitivity for newly paired doorbells is now set to medium
- Fixed a bug that caused some Events to fail uploading
- Fixed a bug that kept the doorbell constantly active
1.0.58 (January 4, 2022)
-
Added more tones
-
Improved Event triggers
-
Fixed a battery indicator bug
Wyze Video Doorbell Firmware
4.25.1.314 (November 3, 2022)
-
Improved live stream connectivity
-
Optimized CPU usage
-
Bug fixes
4.25.1.060 (April 27, 2022)
- Improved live stream connectivity
- Fixed a bug that caused the live stream to get stuck at 3/3
- Added support for Alexa and Google Assistant integration
- Fixed a timestamp issue that caused persisting Error 06 on Wyze Video Doorbell Event videos
- Fixed a bug that caused inaccurate offline statuses
- Fixed a video rotation issue in Wyze Home Monitoring
- Fixed a bug that prevented night vision changes
- Fixed a bug that displayed incorrect chime firmware versions in Device Info
- Fixed a bug that prompted updating when using the most recent update
- Fixed a bug that prevented future setup after a Wi-Fi disconnection during pairing
Update 9/21/22: We are pausing this firmware again while we continue to work on the 3/3 live stream loading issue. Thank you for your patience.
Update 7/28/22: This firmware is being opened to the public again after review.
Note: This firmware is halted while we look into the root cause of the live stream getting stuck at 3/3 issue.
4.25.1.042 (March 30, 2022)
- Added support for Alexa and Google Assistant integration
- Fixed a timestamp issue that caused persisting Error 06 on Wyze Video Doorbell Event videos
- Fixed a bug that caused inaccurate offline statuses
- Fixed a video rotation issue in Wyze Home Monitoring
- Fixed a bug that prevented night vision changes
- Fixed a bug that displayed incorrect chime firmware versions in Device Info
- Fixed a bug that prompted updating when using the most recent update
- Fixed a bug that prevented future setup after a Wi-Fi disconnection during pairing
Note: We are pausing this firmware while we look into the cause of reports of longer loading times for live streams or connections failing at step 3/3. We apologize to anyone impacted by this issue.
4.25.0.313 (December 20, 2021)
- Improved the night vision auto-switch mechanism
- Fixed an IR manual control bug
- Fixed an issue that could cause the doorbell to overheat
- Fixed the “QR Code Incorrect” after the doorbell is reset bug
- Security improvements
4.25.0.244 (May 12, 2021)
- Added the Quick Replies function (2.20 app version required to trigger the voice prompts)
- Fixed a bug that caused the white LED to turn off before Event recording completes
- Fixed a cloud issue that caused devices to keep rebooting when the status light was solid blue
- Fixed a noise issue while using night vision
- Improved the QR scan performance when there is a strong backlight
4.25.0.233 (March 8, 2021)
- Added support for a customized Motion Detection Zone
- Added a watermark for Cam Plus Events
- Added support for automatically changing time zones for DST
- Improved consistency between the day and night mode views
- Fixed a bug that prevented the audio on/off button from working
4.25.0.222 (January 28, 2021)
- Initial release firmware
Wyze Cam Outdoor v2 Firmware
4.48.4.418 (January 4, 2023)
- Fixed a bug that prevented the rotate image 180 degrees setting from sticking
4.48.4.394 (December 7, 2022)
- Added support for microSD cards formatted in exFAT
- Bug fixes
12/8/22 Note: This firmware is halted while we look into reports of the rotate 180 degrees setting needing to be reapplied every time the user enters the live stream page.
4.48.4.278 (September 12, 2022)
- Fixed a bug that caused microSD card recording to fail when allowing time zones offset by half an hour
4.48.4.140 (June 29, 2022)
-
Added support for time zones offset by half an hour
-
Fixed a night vision issue
Note: This firmware is halted because the support for offset time zones caused microSD card recording failure. We apologize for the issue and are working to resolve it.
4.48.4.124 (March 23, 2022)
- Fixed an issue that caused delays when loading live stream video
Wyze Cam Outdoor v1 Firmware
4.17.4.418 (January 4, 2023)
- Fixed a bug that prevented the rotate image 180 degrees setting from sticking
4.17.4.394 (December 7, 2022)
- Added support for exFAT microSD card formats
- Bug fixes
12/8/22 Note: This firmware is halted while we look into reports of the rotate 180 degrees setting needing to be reapplied every time the user enters the live stream page.
4.17.4.278 (September 12, 2022)
- Fixed a bug that caused microSD card recording to fail when allowing time zones offset by half an hour
4.17.4.140 (June 29, 2022)
-
Added support for time zones offset by half an hour
-
Fixed a night vision issue
Note: This firmware is halted because the support for offset time zones caused microSD card recording failure. We apologize for the issue and are working to resolve it.
4.17.4.124 (March 23, 2022)
-
Fixed an issue that caused delays when loading live stream video
4.17.3.93 (February 16, 2022)
- Fixed a bug that caused Events with night vision turned on to speed up
- Fixed a bug that caused faster battery drain when using Cam Plus
- Security improvements
4.17.2.40 (December 20, 2021)
- Added support for Wyze Solar Panel
4.17.1.290 (November 17, 2021)
-
Fixed a bug that prevented Cam Plus Events from being triggered or tagged correctly
4.17.1.287 (October 11, 2021)
- Fixed an issue that caused Wyze Cam Outdoor to not record Motion Events when Cam Plus is enabled
- Fixed an issue that caused battery drain for Wyze Cam Outdoor
4.17.1.247 (September 8, 2021)
- Fixed a bug that caused the Base Station to keep flashing blue after changing the connection method
Note: This firmware is halted while we look into reports of a solid, yellow light on the Base Station after updating. If you have experienced this, please reach out to Wyze Customer Support.
4.17.1.185 (August 9, 2021)
- Fixed a Base Station bug that prevented Event videos from being received properly if sent from multiple cameras at the same time
4.17.1.170 (July 14, 2021)
- Fixed a bug that caused an incorrect battery usage status
4.17.1.123 (June 14, 2021)
- Added Siren support
- Added a Battery Usage Summary in Device Info
- Adjusted the image sensitivity so that it’s easier to trigger motion when the sensitivity is set to low (around 10)
- Removed the push notification when the camera is fully charged to support future products
- Disabled the DHCP server while the Base Station is not pairing or in Travel Mode
4.17.1.52 (April 19, 2021)
- Added support for Wyze Home Monitoring
- Bug Fixes
4.17.1.35 (March 9, 2021)
- Added support for recording Cam Plus Events while viewing the Wyze Cam Outdoor live stream
4.17.1.027 (February 10, 2021)
- Fixed a bug that caused Cam Plus Events to not detect people properly
- Fixed a bug that caused accelerated battery drain with weak WiFi signal
4.17.1.019 (January 26, 2021)
- Added support for a software motion detection zone
- Added a Record Sound toggle
- Fixed a bug causing error code 06 and 07
Note: Firmware file removed due to critical bugs. We are working on resolving them and will send out new versions when they're ready. Sorry for the trouble!
4.17.1.001 (January 5, 2021)
- Added support for the Base Station to connect over WiFi
- Hid the Base Station SSID
- Added support for motion-only scheduled local recordings
4.17.0.186 (December 2, 2020)
- Fixed a bug that showed the wrong duration for Cam Plus videos
- Added support for syncing time
- Bug fixes
4.17.0.183 (November 3, 2020)
- Added support for Cam Plus
- Fixed a connectivity bug caused by incompatible firmware
- Fixed an bug that occasionally caused the firmware update to fail
- Fixed a bug that caused the Wyze Cam Outdoor to stay connected when disconnected from WiFi
- Fixed a bug that the prevented the status light from turning solid red when the camera was turned off and fully charged
- Missing Event thumbnails when Person Detection is turned off (this is a cloud issue and will be resolved later)
4.17.0.160 (October 29, 2020)
- Fixed a bug preventing live stream connection for newer Wyze Cam Outdoor cameras
Note: This firmware version was pushed to devices that were affected. It was not available to all Wyze Cam Outdoor devices.
4.17.0.159 (September 9, 2020)
- Added push notifications when the Wyze Cam Outdoor is full charged
- Added push notifications when local microSD card recordings are complete
- Fixed bugs that prevented Event videos from triggering properly
- Fixed a delayed push notification issue
- Added limited logs when the camera doesn't have a microSD card
- Fixed a Travel Mode voice prompt bug
4.17.0.146 (July 29, 2020)
- Added motion detection logic besides PIR when motion Events are triggered
- Fixed an issue that caused night vision to turn on and off repeatedly in some low-light situations
- Changed file directory names for microSD card recordings
- Fixed a scheduled recording download bug
- Fixed a bug that prevented retrieval of local recording information
- Bug fixes
Wyze Cam Outdoor Base Station Firmware
4.16.4.452 (December 7, 2022)
- Added support for microSD cards formatted in exFAT
- Bug fixes
12/12/22 Note: This firmware is being re-opened because the bug preventing the settings from sticking is found only on the camera firmware. We have a beta build that addresses the camera firmware going out to testers this week.
12/8/22 Note: This firmware is halted while we look into reports of the rotate 180 degrees setting needing to be reapplied every time the user enters the live stream page.
4.16.3.117 (April 25, 2022)
- Fixed an issue that prevented reconnecting to the live stream after offline status
- Security Improvements
Update 5/11/22: The issue with this firmware was related to using previous app versions. We are now releasing this firmware again. Please make sure you are using Android app version 2.30.1.141 or iOS app version 2.30.1.10 before updating to Wyze Cam Outdoor Base Station firmware 4.16.3.117.
Note: This firmware is halted because of reports of a solid yellow light on the Base Station after updating. If you have experienced this, please reach out to Wyze Customer Support for assistance.
4.16.2.66 (January 18, 2022)
- Security improvements
Note: After investigation, we are re-opening access to this firmware. Thank you for your patience while we looked into the reported issues.
Note: We're sorry, folks. Base Station version 4.16.2.66 is halted while we investigate reports of Base Stations not working after the update. If this has happened to you, please reach out to us through https://support.wyze.com.
Note: This is the second update in a set of two. It is important to update to version 4.16.2.45 first. If you updated to 4.16.2.66 previously, no further action is needed.
4.16.2.45 (January 18, 2022)
- Security improvements
Note: This is the first update in a set of two. After updating to this version, please update to 4.16.2.66. If you have previously updated to 4.16.2.66, do not firmware flash back to this version.
4.16.2.66 (December 20, 2021)
- Added support for Wyze Solar Panel
- Security improvements
Base Station version
We're sorry, folks. Base Station version 4.16.2.66 is halted while we investigate reports of Base Stations not working after the update. If this has happened to you, please reach out to us through https://support.wyze.com.
Note: Once your Base Station is updated to 4.16.2.66, flashing the firmware to an earlier version will prevent the Base Station from functioning. Because of this, previous Base Station firmware links have been removed.
4.16.2.37 (November 17, 2021)
-
Fixed a bug that caused rapid battery drain for the camera
-
Security improvements
4.16.2.26 (October 11, 2021)
- Fixed an issue that prevented the Base Station from connecting to WiFi with a space in the WiFi SSID
- Fixed an issue that caused the Base Station to show a flashing blue light
- Fixed a bug preventing Cam Plus from detecting pets or packages on Wyze Cam Outdoor
4.16.2.16 (August 9, 2021)
- Fixed a Base Station bug that prevented Event videos from being received properly if sent from multiple cameras at the same time
4.16.2.12 (July 14, 2021)
- Fixed a bug that caused an incorrect battery usage status
4.16.2.7 (June 14, 2021)
- Added Siren support
- Added a Battery Usage Summary in Device Info
- Adjusted the image sensitivity so that it’s easier to trigger motion when the sensitivity is set to low (around 10)
- Removed the push notification when the camera is fully charged to support future products
- Disabled the DHCP server while the Base Station is not pairing or in Travel Mode
4.16.1.22 (April 19, 2021)
- Added support for Wyze Home Monitoring
- Bug Fixes
4.16.1.14 (March 9, 2021)
- Fixed a bug that caused Wyze Cam Outdoor to go offline
4.16.1.13 (February 24, 2021)
- Added support for automatically updating time zones for DST
4.16.1.8 (February 8, 2021)
- Fixed a bug that prevented motion detection from working
4.16.1.7 (January 26, 2021)
- Added support for a software motion detection zone
- Added a Record Sound toggle
- Fixed a bug causing error code 06 and 07
Note: Firmware file removed due to critical bugs. We are working on resolving them and will send out new versions when they're ready. Sorry for the trouble!
4.16.0.200 (January 5, 2021)
- Added support for the Base Station to connect over WiFi
- Hid the Base Station SSID
- Added support for motion-only scheduled local recordings
4.16.0.190 (December 2, 2020)
- Fixed a bug that showed the wrong duration for Cam Plus videos
- Added support for syncing time
- Bug fixes
4.16.0.187 (November 3, 2020)
- Added support for Cam Plus
- Fixed a connectivity bug caused by incompatible firmware
- Fixed an bug that occasionally caused the firmware update to fail
- Fixed a bug that caused the Wyze Cam Outdoor to stay connected when disconnected from WiFi
- Fixed a bug that the prevented the status light from turning solid red when the camera was turned off and fully charged
- Missing Event thumbnails when Person Detection is turned off (this is a cloud issue and will be resolved later)
4.16.0.169 (October 29, 2020)
- Fixed a bug preventing live stream connection for newer Wyze Cam Outdoor cameras
Note: This firmware version was pushed to devices that were affected. It was not available to all Wyze Cam Outdoor devices.
4.16.0.168 (September 9, 2020)
- Added push notifications when the Wyze Cam Outdoor is full charged
- Added push notifications when local microSD card recordings are complete
- Fixed a delayed push notification issue
4.16.0.158 (August 19, 2020)
- Fixed a pairing issue involving conflicting IP addresses
4.16.0.155 (July 29, 2020)
- Fixed a bug with IFTTT that caused an incorrect motion detection status
- Changed file directory names for downloads, Event videos, and thumbnails
- Bug fixes
Wyze Cam Pan v3 Firmware
4.50.3.4240 (April 24, 2023)
- Improved Wi-Fi connection stability
- Fixed an issue that caused dropped frames
- Fixed a bug that prevented recording Events to a microSD card
4.50.2.3762 (February 20, 2023)
- Improved Wi-Fi connection stability
Note: This is releasing to 10% of customers on February 20th. We'll release to more customers over the following 3 weeks. If you don't see the update now, don't worry! You'll see it later.
4.50.1.3603 (January 30, 2023)
- Improved stability for playing Event Videos
- Fixed a bug that displayed the wrong time zone
4.50.0.3405 (January 10, 2023)
-
Improved the Error Code 06 rate for replaying Event Videos
-
Fixed a bug that caused Pan Scan to record excessive Events
-
Fixed a bug that caused microSD card reading issues
Wyze Cam Pan v2 Firmware
4.49.3.4054 (March 22, 2023)
- Improved Event Video recording stability
- Improved Internet connection logic and connection recovery
- Fixed a bug that caused Cam Plus Lite Events to not play due to Error 3001
- Fixed an issue that caused Event Videos to lose frames
- Fixed a bug that affected Internet connection when connected to open Wi-Fi
- Due to the security improvement on this firmware, you will need to go through the factory reset process for your camera if you go back to firmware 4.49.1.47 or below
4/3/23 - Note: We're slowing down the gradual release for this firmware while we check on some reported issues. The gradual release is expected to take longer than initially expected to accommodate this caution.
3/22/23 - Note: We are doing a gradual release for this firmware over two weeks. If you do not have this firmware version yet, don't worry! You'll receive it later.
4.49.3.2864 (November 2, 2022)
- Improved Internet connection code
- Improved live stream connectivity
- Improved IoT connectivity
- Fixed a bug that prevented the device from reconnecting after a router reboot
- Fixed a bug that caused an incorrect membership status after quickly switching membership
- Fixed a bug that caused Error 3001 when viewing motion and sound Events
- Security improvements
-
Due to the security improvement on this firmware, you will need to go through the factory reset process for your camera if you go back to firmware 4.49.1.47 or below.
11/10/22 - Note: This firmware is being halted to investigate an issue with event recording.
11/2/22 - Note: We are doing a gradual release for this firmware over two weeks. If you do not have this firmware version yet, don't worry! You'll receive it later.
4.49.3.2705 (October 18, 2022)
- Improved Internet connection code
- Improved live stream connectivity
- Improved IoT connectivity
- Fixed a bug that prevented the device from reconnecting after a router reboot
- Bug Fixes
- Security improvements
-
Due to the security improvement on this firmware, you will need to go through the factory reset process for your camera if you go back to firmware 4.49.1.47 or below.
11/2/22 - Note: This firmware was replaced with 4.49.3.2864
4.49.1.47 (March 17, 2022)
- Security improvements
4.49.1.41 (February 17, 2022)
- Fixed Cam Plus Lite bugs
4.49.1.34 (January 26, 2022)
-
Fixed an integration bug with Wyze Home Monitoring
-
Fixed a log issue after unexpected reboot
4.49.1.25 (October 21, 2021)
- Fixed a rebooting bug when using 360p for viewing the live stream
4.49.1.21 (September 10, 2021)
- Stability improvements
- Security improvements
Wyze Cam Pan Firmware
4.10.9.1851 (February 2, 2023)
- Improved the Event Video upload success rate
- Fixed a bug that affected camera connection recovery after a cloud outage
4.10.9.1574 (December 7, 2022)
- Fixed a bug that affected camera connection on Wi-Fi with a long password
- Fixed a bug that prevented AI detection settings from syncing
4.10.9.1472 (November 2, 2022)
- Fixed a bug that affected camera IoT connection after a cloud outage
- Fixed a bug that caused incorrect membership status after switching between statuses
- Fixed a bug that caused Error 3001 when viewing motion and sound Events
4.10.9.1433 (September 27, 2022)
-
Improved Internet connection code
-
Improved live stream connectivity
-
Improved IoT connectivity
-
Improved microSD card playback stability
-
Bug fixes
-
Security improvements
-
Due to the security improvement on this firmware, you will need to go through the setup process for your camera if you go back to firmware 4.9.8.1002 or below. Because of this, we are removing those firmware files from this page.
Note: We are doing a gradual release for this firmware over several weeks. If you do not have this firmware version yet, don't worry! You'll receive it later.
4.10.8.1002 (March 17, 2022)
-
Security improvements
-
AI Event bug fixes
4.10.8.860 (January 26, 2022)
- Bug fixes
Note: This firmware is paused because some of the devices with this firmware lose AI detection. We are working on a new firmware version to resolve this issue.
4.10.8.746 (December 20, 2021)
- Added support for microSD cards larger than 32GB
- Improved the Cam Plus Event replay success rate
- Improved camera stability
- Fixed a constant reboot bug
- Fixed a bug that prevented sound notifications when using Cam Plus
- Fixed a bug that caused missing Events when using Cam Plus
- Other bug fixes
Note: This release is halted while we investigate an AI bug and live streaming issue. We apologize for the inconvenience.
4.10.8.501 (November 10, 2021)
- Bug fixes
4.10.7.1068 (September 8, 2021)
- Bug fixes
4.10.7.798 (July 21, 2021)
- Improved an issue that caused Cam Plus Events to skip or lose frames
- Changed the MP4 audio format
- Reduced the time for receiving push notifications
- Improved sound detection sensitivity
- Fixed a bug that caused a loud sound in Playback if sound was already enabled in the live stream
- Added WPA3 WiFi network support
- Improved camera stability
- Security improvements
4.10.6.241 (March 9, 2021)
- Increased 2-way audio volume for Wyze Cam v2 and Pan
- Adjusted the motion detection sensitivity per users’ feedback
- Improved Cam Plus Event push notification time (less strong networks may not see much change)
- Improved the stability of time stamp syncing with the NTP server
- Improved stability for motion detection
- Fixed a bug that caused Event videos to lose a couple of seconds at the beginning
- Fixed a bug causing unnecessary camera reboot
- Other bug fixes and improvements
Note: This firmware update has been halted while we investigate the cause of an issue that may be related to this update. If we find that the update is not the cause, we will resume the rollout.
4.10.6.218 (November 18, 2020)
- Added support for a custom motion detection zone (2.15 app required)
- Fixed a bug that caused turned off cameras to start recording after being power cycled
- Changed the algorithm for motion detection when a detection zone is enabled.
- Changed the motion tracking logic when a detection zone is enabled.
Note: This firmware update is halted as we look into increased motion detection sensitivity. If you still want this update, you can flash the firmware using the file linked here.
4.10.6.199 (October 21, 2020)
- Fixed a bug that would impact the DST time change
- Fixed a bug that prevented syncing with GMT+13 and GMT+14 time zones
4.10.6.193 (October 5, 2020)
- Fixed a bug that caused Wyze Cam Pans to go offline if the camera time zone is outside of GMT-8 to GMT+8
4.10.6.191 (September 30, 2020)
- Improved the logs for error analysis
- Fixed a bug that may increase the 'no fragment' error for Event videos
- Fixed a bug which may cause Cam Plus devices to not record motion
- Fixed an bug that could cause a log submission to fail
- Fixed a reboot issue during microSD card playback
- Fixed a reboot issue related to detection zone settings
- Fixed a Wyze Cam Pan bug that caused over-sensitive motion detection when a Detection Zone was enabled
- Fixed a Wyze Cam Pan bug that could trigger Events due to motor movement
- Fixed a bug that could erase microSD card files when not using the FAT32 format
- Other bug fixes
Note: This update was stopped and we will not be uploading the file for download due to a time zone bug fixed in 4.10.6.193.
4.10.6.156 (July 28, 2020)
- Added support for Person Detection on CMC videos (2.12 app update required)
- Improved CMC camera stability
- Improved Wyze Cam performance
- Fixed an issue which could cause Wyze Cams using CMC to reboot
- Other bug fixes
4.10.5.111 (March 18, 2020)
- Optimized the SD card ejection logic
- Improved Google Nest Hub streaming
4.10.5.98 (January 27, 2020)
- Removed XNOR person detection
- Added support for ejecting microSD cards
- Improvements for syncing video and audio
- Fixed event videos making noise when camera has disabled sound recording and CMC service is being used
- Fixed live stream disconnect issues for camera groups
- Other bug fixes
4.10.5.94 (January 21, 2020)
- Removed XNOR person detection
- Added support for ejecting microSD cards
- Improvements for syncing video and audio
- Fixed event videos making noise when camera has disabled sound recording and CMC service is being used
- Other bug fixes
4.10.5.34 (November 15th, 2019)
- Added support for Complete Motion Capture, an add-on service that will record to the cloud whenever there is motion. Free trial available after the upcoming 2.6 app update.
- Bug fixes
4.10.3.169 (September 24th, 2019)
- Added New AI model improving person detection
- Added Security Updates
4.10.3.108 (July 8, 2019)
- Added person detection support
- Added support for Wyze Sense status light toggle
- Fixed an issue that may cause time lapse file download failure
- Fixed an issue that may cause Wyze Sense Bridges to stop working when rebooting or upgrading the camera
- Fixed an issue that may cause Wyze Sense Bridges to remain solid yellow if the Wyze Cam Pan loses power
4.10.3.60 (May 9, 2019)
- Fixed an issue that prevented motion from being properly detected
4.10.3.50 (April 23, 2019)
- Integrated the latest firmware for Wyze Sense
- Improved the security of time lapse downloading
- Fixed the issue with no internet connection causing reboot
- Improved the compatibility with mesh networks
- Applied the detection zone and sensitivity settings for local recording
- Security updates
4.10.3.40 (March 4, 2019)
- Fixed an issue where devices rebooted due to poor network connections.
- Fixed an issue leading to device reboot when the Wyze Cam does not have microSD card read/write permission.
- Fixed an issue causing devices to not recognize microSD cards.
- Fixed an issue where devices sent extra heartbeat signals to AWS.
- Added logic to adjust the camera clock automatically for Daylight Savings Time.
- Security updates
4.10.2.31 (January 15, 2019)
- Minor IQ (image quality) update, which fixed some devices having yellow tint images
4.10.2.27 (December 17, 2018)
- Added more guard check before firmware upgrade to make upgrade safer
- Added logs for firmware upgrade to catch upgrade issues
- Fixed an issue that cameras may not execute on/off/restart commands correctly
- Updated solution for the ‘incorrect offline status’ issue
- Fixed an issue that can cause cameras to upload event videos multiple times
4.10.1.40 (October 22, 2018)
- Fixed a bug that caused Playback to play faster during the minute transition
- Added that photos are saved on microSD card as well as the device Album
- Fixed the yellow tint issue on Wyze Pan images
- Other bug fixes
4.10.1.27 (September 18, 2018)
- Added V1.5 feature support
- Fixed a bug when the camera is off, night vision switches on/off and IR lights stay on
- Fixed a bug when the camera is off, it still sends alerts
- Other bug fixes
4.10.1.8 (July 11, 2018)
- Added Alexa integration support
- Added v1.4 App IoT feature support
- Fixed a bug that night vision LED’s stayed on when the camera is turned off.
- Fixed an issue when IoT status is not updated correctly
- Bug fixes
4.10.0.223 (June 15, 2018)
- Fixed an issue for firmware upgrade
- No functionality change
4.10.2.222 (May 30, 2018)
- Support all existing features for Wyze Cam v1/v2
- New pan/tilt control support
- New motion tracking feature
- New Pan Scan feature
- Enhanced 2-way audio
Wyze Cam OG Firmware
1.0.63 (March 22, 2023)
- Fine-tuned image color accuracy
- Fixed a compatibility issue with certain ISP that resulted in occasional Cam Plus video upload failures
- Bug fixes
1.0.59 (February 13, 2023)
- Improved red color and clarity in certain lighting conditions
- Optimized night vision brightness with the IR LED turned off
- Fixed a bug that prevented Event Videos from being downloaded if the Record Sound setting was turned off
- Fixed a Playback freeze issue
- Bug fixes
Wyze Cam OG Telephoto Firmware
1.0.59 (February 13, 2023)
- Improved image quality
- Fixed the blue color tint in for outdoor low light conditions
- Fixed a bug that prevented Event Videos from being downloaded if the Record Sound setting was turned off
- Fixed a Playback freeze issue
- Bug fixes
Wyze Cam v3 Pro Firmware
4.58.0.3210 (December 12, 2022)
- Improved low light performance
- Improved noise cancellation
- Improved thumbnail image quality
- Improved log recording
- Reduced firmware size
- Fixed a 0 second Event Video bug
- Fixed a device connection issue
4.58.0.2905 (November 2, 2022)
- Optimized the user experience
Wyze Cam v3 Firmware
4.36.10.4054 (March 22, 2023)
- Improved Event Video recording stability
- Improved Internet connection logic and connection recovery
- Fixed a bug that caused Cam Plus Lite Events to not play due to Error 3001
- Fixed an issue that caused Event Videos to lose frames
- Fixed a bug that affected Internet connection when connected to open Wi-Fi
- Due to the security improvement on this firmware, you will need to go through the factory reset process for your camera if you go back to firmware 4.36.9.139 or below
4/3/23 - Note: We're slowing down the gradual release for this firmware while we check on some reported issues. The gradual release is expected to take longer than initially expected to accommodate this caution.
3/22/23 - Note: We are doing a gradual release for this firmware over two weeks. If you do not have this firmware version yet, don't worry! You'll receive it later.
4.36.10.3406 (December 15, 2022)
- Improved Event Video recording stability
- Fixed bugs that caused Events to fail uploading to the cloud
- Fixed a bug that prevented devices from reconnecting to IoT
- Due to the security improvement on this firmware, you will need to go through the factory reset process for your camera if you go back to firmware 4.36.9.139 or below
12/16/22 Note: Now all Wyze Cam v3s using 4.36.10.2163 or higher firmware will have access to this release. Thanks for your patience!
12/15/22 Note: This firmware is only released to cameras using the 4.36.10.2864 firmware to fix bugs introduced in that version. Cameras not using that version will not have this update available to them. Cameras using version 4.36.10.2700 will receive the firmware as a manual push from our side.
4.36.10.2864 (November 2, 2022)
- Improved Internet connection code
- Improved live stream connectivity
- Improved IoT connectivity
- Fixed an issue that prevented the device from reconnecting after a router reboot
- Fixed an issue that caused devices to stop working after a firmware update
- Fixed a bug that caused an incorrect membership status after quickly switching membership
- Fixed a bug that caused Error 3001 when viewing motion and sound Events
- Security improvements
- Due to the security improvement on this firmware, you will need to go through the factory reset process for your camera if you go back to firmware 4.36.9.139 or below
11/10/22 - Note: This firmware is being halted to investigate an issue with event recording.
11/2/22 - Note: We are doing a gradual release for this firmware over two weeks. If you do not have this firmware version yet, don't worry! You'll receive it later.
4.36.10.2700 (October 18, 2022)
- Improved Internet connection code
- Improved live stream connectivity
- Improved IoT connectivity
- Fixed an issue that prevented the device from reconnecting after a router reboot
- Fixed an issue that caused devices to stop working after a firmware update
- Bug fixes
- Security improvements
- Due to the security improvement on this firmware, you will need to go through the factory reset process for your camera if you go back to firmware 4.36.9.139 or below
11/2/22 - Note: This firmware was replaced with 4.36.10.2864.
4.36.9.139 (May 18, 2022)
- Added support for garage door controller trigger duration settings
4.36.9.131 (April 25, 2022)
Wyze Cam v3:
- Improved logs for accessory product firmware update failure
- Adjusted the audio priority for camera features
- Fixed an image quality bug that produced a strobing effect
- Fixed a bug that caused a reboot after pairing Wyze Cam v3 for the first time
Wyze Lamp Socket:
- Improved lamp socket response time
Wyze Cam Floodlight:
- Reduced face overexposure when the floodlight is turned on
- Modified the default lighting time to 30 seconds
- Fixed a bug that caused false detection when viewing the live stream
4.36.8.32 (March 17, 2022)
- Security improvements
4.36.8.26 (February 17, 2022)
- Fixed Cam Plus Lite bugs
4.36.8.15 (December 6, 2021)
Wyze Cam v3:
- Added support for exFAT microSD card formats
- Improved logs
- Stability improvements
- Bug fixes
Wyze Lamp Socket:
- Improved sunrise/sunset schedule performance
- Improved connection with Wyze Cam v3
- Fixed a pairing bug when using multiple Wyze Cam v3 cameras
- Fixed a night vision bug
- Stability improvements
- Bug fixes
Wyze Cam Floodlight:
- Adjusted the lighting threshold for when the floodlight turns on
- Fixed a siren bug
- Improved logs
- Bug fixes
4.36.7.22 (November 22, 2021)
Wyze Cam v3:
- Fixed a bug preventing Wyze Home Monitoring compatibility
- Bug fixes
Wyze Lamp Socket:
- Fixed a bug that prevented restart logs from generating
- Fixed a bug preventing status updates in the Home tab
- Fixed a bug that impacted turning on night vision after it was turned off for a long time
- Stability improvements
Wyze Cam Floodlight:
- Algorithm improvements
- Improved 2-way audio
- Adjusted default settings
4.36.6.17 (November 3, 2021)
- Added the ability to unpair Wyze Lamp Socket
- Improved Wyze Lamp Socket stability
- Fixed a siren noise bug
- Security improvements
- Bug fixes
4.36.3.19 (August 26, 2021)
- Improved Spotlight recognition
- Updated Spotlight settings
- Added 2-way audio support for WebRTC
Note: This firmware can be flashed without flashing the 4.36.3.18 firmware first. But if you are using the standard in-app update method, you will need to update to 4.36.3.18 and then begin the update process for 4.36.3.19.
4.36.3.18 (August 26, 2021)
- Update required for the 4.36.3.19 update to function properly
4.36.2.5 (June 14, 2021)
- Improved logs
- Improved memory usage
- Improved power consumption when connected to WiFi
- Improved system stability
4.36.1.4 (May 5, 2021)
- Added support for a custom motion detection zone
- Added support for turning on the spotlight when sound is detected
- Added support for using the spotlight via Rules
- Improved Event video uploading
- Improved spotlight firmware stability
- Improved the sound detection algorithm
4.36.0.280 (March 29, 2021)
-
Added microSD card status reporting to the app
-
Added support for siren control in Rules
-
Fixed a Spotlight recognition bug when the WiFi signal is weak
-
Added Spotlight debugging information to logs
-
Improved the Spotlight update process
-
Spotlight motion detection now uses the camera motion detection setting
4.36.0.252 (February 17, 2021)
- Improved the recognition rate for microSD cards
- Added a turn off function for microSD cards
- Added an independent update function for the Spotlight
- Fixed a bug when switching Spotlights
- Fixed a Spotlight authentication failure bug
- Fixed an excessive DNS lookup issue
4.36.0.248 (February 1, 2021)
- Improved the recognition rate for microSD cards
- Added a turn off function for microSD cards
- Added an independent update function for the Spotlight
- Fixed a bug when switching Spotlights
- Fixed a Spotlight authentication failure bug
Note: Firmware file removed due to critical bugs. We are working on resolving them and will send out new versions when they're ready. Sorry for the trouble!
4.36.0.228 (December 28, 2020)
- Improved local storage stability
- Fixed a connectivity bug that caused live streams to get stuck at 3/3
- Fixed a bug that caused a yellow spot in the center of the video
- Added Spotlight support
4.36.0.125 (November 15, 2020)
- Initial release firmware
Wyze Cam Floodlight Pro Firmware
2.0.921 (May 31, 2023)
- Updated Image Quality (IQ) to improve image quality in both color and IR night vision
Wyze Cam Floodlight Firmware
1.0.0.55 (December 1, 2021)
-
UI improvements
- Bug fixes
Wyze Cam v3 Garage Door Controller Firmware
0.10.0.21 (May 18, 2022)
- Added support for garage door controller trigger duration settings
0.10.0.15 (May 5, 2022)
- Changed the controller trigger duration from 0.2 seconds to 2 seconds
- Fixed the unresponsive garage door control bug
- Fixed an issue that prevented QR code calibration due to door closure failure
Wyze Cam v3 Spotlight Firmware
0.0.0.16 (November 22, 2021)
-
Improved the connectivity between the camera and spotlight
-
Added auto-reconnect if connection fails
Wyze Cam Lamp Socket Firmware
0.9.0.27 (August 29, 2022)
- Improved lamp socket reliability
Wyze Cam v2 Firmware
4.9.9.1851 (February 2, 2023)
- Improved the Event Video upload success rate
- Fixed a bug that affected camera connection recovery after a cloud outage
4.9.9.1574 (December 7, 2022)
- Fixed a bug that affected camera connection on Wi-Fi with a long password
- Fixed a bug that prevented AI detection settings from syncing
4.9.9.1472 (November 2, 2022)
-
Fixed a bug that affected camera IoT connection after a cloud outage
-
Fixed a bug that caused incorrect membership status after switching between statuses
-
Fixed a bug that caused Error 3001 when viewing motion and sound Events
4.9.9.1433 (September 27, 2022)
-
Improved Internet connection code
-
Improved live stream connectivity
-
Improved IoT connectivity
-
Improved microSD card playback stability
-
Bug fixes
-
Security improvements
-
Due to the security improvement on this firmware, you will need to go through the setup process for your camera if you go back to firmware 4.9.8.1002 or below. Because of this, we are removing those firmware files from this page.
Note: We are doing a gradual release for this firmware over several weeks. If you do not have this firmware version yet, don't worry! You'll receive it later.
4.9.8.1002 (March 17, 2022)
-
Security improvements
-
AI Event bug fixes
4.9.8.860 (January 26, 2022)
-
Bug fixes
Note: This firmware is paused because some of the devices with this firmware lose AI detection. We are working on a new firmware version to resolve this issue.
4.9.8.746 (December 20, 2021)
- Added support for microSD cards larger than 32GB
- Improved the Cam Plus Event replay success rate
- Improved camera stability
- Fixed a constant reboot bug
- Fixed a bug that prevented sound notifications when using Cam Plus
- Fixed a bug that caused missing Events when using Cam Plus
- Other bug fixes
Note: This release is halted while we investigate an AI bug and live streaming issue. We apologize for the inconvenience.
4.9.8.501 (November 10, 2021)
- Bug fixes
4.9.7.1068 (September 8, 2021)
- Bug fixes
4.9.7.798 (July 21, 2021)
- Improved an issue that caused Cam Plus Events to skip or lose frames
- Changed the MP4 audio format
- Reduced the time for receiving push notifications
- Improved sound detection sensitivity
- Fixed a bug that caused a loud sound in Playback if sound was already enabled in the live stream
- Improved camera stability
- Security improvements
4.9.6.241 (March 9, 2021)
- Increased 2-way audio volume for Wyze Cam v2 and Pan
- Adjusted the motion detection sensitivity per users’ feedback
- Improved Cam Plus Event push notification time (less strong networks may not see much change)
- Improved the stability of time stamp syncing with the NTP server
- Improved stability for motion detection
- Fixed a bug that caused Event videos to lose a couple of seconds at the beginning
- Fixed a bug causing unnecessary camera reboot
- Other bug fixes and improvements
4.9.6.218 (November 18, 2020)
- Added support for a custom motion detection zone (2.15 app required)
- Fixed a bug that caused turned off cameras to start recording after being power cycled
- Changed the algorithm for motion detection when a detection zone is enabled.
- Changed the motion tracking logic when a detection zone is enabled.
Note: This firmware update is halted as we look into increased motion detection sensitivity. If you still want this update, you can flash the firmware using the file linked here.
4.9.6.199 (October 21, 2020)
- Fixed a bug that would impact the DST time change
- Fixed a bug that prevented syncing with GMT+13 and GMT+14 time zones
4.9.6.193 (October 5, 2020)
- Fixed a bug that caused Wyze Cams to go offline if the camera time zone is outside of GMT-8 to GMT+8
4.9.6.191 (September 30, 2020)
- Improved the logs for error analysis
- Fixed a bug that may increase the 'no fragment' error for Event videos
- Fixed a bug which may cause Cam Plus devices to not record motion
- Fixed an bug that could cause a log submission to fail
- Fixed a reboot issue during microSD card playback
- Fixed a reboot issue related to detection zone settings
- Fixed a bug that could erase microSD card files when not using the FAT32 format
- Other bug fixes
Note: This update was stopped and we will not be uploading the file for download due to a time zone bug fixed in 4.9.6.193.
4.9.6.156 (July 28, 2020)
- Added support for Person Detection on CMC videos (2.12 app update required)
- Improved CMC camera stability
- Improved Wyze Cam performance
- Fixed an issue which could cause Wyze Cams using CMC to reboot
- Other bug fixes
4.9.5.115 (August 31, 2020)
- Adds the same functionality as the 4.9.5.111 firmware
- Adds hardware compatibility between Wyze Cam batches
Note: This version was added to give customers an option for flashing back firmware to a previous version. Older firmware versions are being removed from this page because they are incompatible with newer Wyze Cams and would break a newer camera if applied.
4.9.5.111 (March 18, 2020)
- Optimized the SD card ejection logic
- Improved Google Nest Hub streaming
4.9.5.98 (January 27, 2020)
- Removed XNOR person detection
- Added support for ejecting microSD cards
- Improvements for syncing video and audio
- Fixed event videos making noise when camera has disabled sound recording and CMC service is being used
- Fixed live stream disconnect issues for camera groups
- Other bug fixes
4.9.5.94 (January 21, 2020)
- Removed XNOR person detection
- Added support for ejecting microSD cards
- Improvements for syncing video and audio
- Fixed event videos making noise when camera has disabled sound recording and CMC service is being used
- Other bug fixes
Note: The .94 firmware version was pulled before most people upgraded to it due to errors that surfaced with the release.
4.9.5.36 (November 15, 2019)
- Added support for Complete Motion Capture, an add-on service that will record to the cloud whenever there is motion. Free trial available after the upcoming 2.6 app update.
- Fixed an issue that prevented motion detection, notifications, and local recording in some Wyze Cam v2s.
- Bug fixes
4.9.4.169 (September 24, 2019)
- Added new AI model improving person detection
- Added Security Updates
4.9.4.108 (July 8, 2019)
- Added person detection support
- Added support for Wyze Sense status light toggle
- Fixed an issue that may cause time lapse file download failure
- Fixed an issue that may cause Wyze Sense Bridges to stop working when rebooting or upgrading the camera
4.9.4.37 (April 22, 2019)
- Integrated the latest firmware for Wyze Sense
- Improved the security of time lapse downloading
- Fixed the issue with no internet connection causing reboot
- Improved the compatibility with mesh networks
- Applied the detection zone and sensitivity settings for local recording
- Security updates
4.9.4.28 (February 27, 2019)
- Fixed an issue leading to poor network connections causing device reboots
- Fixed an issue that may cause time lapse video download errors to occur
- Security updates
4.9.3.64 (December 17, 2018)
- Added more guard check before firmware upgrade to make upgrade safer
- Added logs for firmware upgrade to catch upgrade issues
- Fixed an issue that cameras may not execute on/off/restart commands correctly
- Updated solution for the ‘incorrect offline status’ issue
- Fixed an issue that can cause cameras to upload event videos multiple times
4.9.2.52 (October 22, 2018)
- Fixed a bug making Playback play faster during the minute transition
- Added that photos are saved on microSD card as well as the device Album
- Other bug fixes
4.9.2.42 (September 17, 2018)
- Added v1.5 feature support
- Fixed a bug that when the camera is off, night vision still switches on/off and IR lights stay on
- Fixed a bug that when the camera is off, it still sends alerts
- Other bug fixes
4.9.2.18 (July 11, 2018)
- Added Alexa integration support
- Added v1.4 app IoT feature support
- Fixed an issue when IoT status is not updated correctly
- Bug fixes
4.9.1.76 (June 20, 2018)
- Updated night vision switch logic to reduce frequent switches
- Updated connection logic to reduce ‘stuck at 3/3’ issues
- Changed SD card rollover logic to delete 1 hour of oldest video each time
- Changed an issue that one minute long video only has 52 seconds of audio
- Changed an issue that with night vision on, recorded video played like in “fast-forward” mode
4.9.1.60 (Apr 25, 2018)
- Updated IQ to remove the green/lime tint
- Added noise reduction for background sound
4.9.1.42 (Apr 13, 2018)
- Image quality (IQ) update
4.9.1.34 (Apr 3, 2018)
- New image quality (IQ) update
Wyze Cam v1 Firmware
3.9.4.35 (August 17, 2022)
-
Fixed a bug that could prevent the camera from reconnecting
-
This firmware is difficult for the camera to apply due to its size. If your device has a solid yellow light or cannot connect after the update, please try flashing the firmware using a microSD card to recover it
Note: While this product isn't officially supported and we aren't able to fit more features and bug fixes onto the hardware, we’ve created firmware update 3.9.4.35 to fix this cloud connection problem.
3.9.4.32 (January 21, 2020)
- Improvements for syncing video and audio
- Other bug fixes
3.9.4.16 (April 23, 2019)
- Integrated the latest firmware for Wyze Sense
- Added thumbnails for Event videos
- Improved the security of time lapse downloading
- Applied the detection zone and sensitivity settings for local recording
- Fixed an issue that may cause cameras with microSD cards to reboot
- Security updates
3.9.3.96 (Feb 20, 2019)
- Fixed an issue where devices rebooted due to poor network connections
- Fixed an issue leading to device reboot when the Wyze Cam does not have microSD card read/write permission
- Fixed an issue causing devices to not recognize microSD cards
- Fixed an issue where devices sent extra heartbeat signals to AWS
- Additional security updates
3.9.3.88 (Dec 13, 2018)
- Updated solution for the 'incorrect offline status' issue
- Added more guard check before firmware upgrade to make upgrade safer
- Added logs for firmware upgrade to catch upgrade issues
- Fixed an issue that cameras may not execute on/off/restart commands correctly
- Fixed an issue that camera keeps some large size videos on SD card
3.9.3.72 (Sept 25, 2018)
- Added automation and shortcuts, double tap zoom, and arrows in Playback
- Fixed a bug that with the camera turned off, night vision still switches on or off and IR's stay on
- Fixed a bug when the alert schedule jumps to a random time schedule after switching to all day
3.9.3.62 (Apr 26, 2018)
- Motion detection zone (only works with app v1.3 to be released later)
- Allowed turning on/off sound for recording (only works with app v1.3 to be released later)
- Changed motion/sound alert sensitivity to 1-100 scale (only works with app v1.3 to be released later)
- Updated connection libraries with better connection results
3.9.2.30 (Feb 15, 2018)
- Simplified alert logic for better alert and notification stability
- Enable recording and pause/resume in playback
- Enable microSD card format
- Provide option to turn on/off timestamp watermark in video frame
- Bug fixes
3.9.1.102
- Improved connectivity focusing on reducing intermittent disconnections
- Improved troubleshooting during setup
- Fixed an issue that assigned different MAC addresses for a device
- Bug fixes
3.9.1.84
- Alert schedule support (v1.1.42 app or above required)
- Allowed camera to sync time with the app (fixed DST time change issue, V1.1.42 app or above required)
- Added troubleshooting during setup for wrong network name and WEP network
- Tuned down motion alert sensitivity
- More accurate playback availability display (v1.1.42 app or above required)
- Updated time verification mechanism
- Bug fixes
3.9.1.52
- Improved connection stability
- Improved live stream stability
- Fixed an issue with no alerts being received when the alert setting is on
- Fixed an issue with local recording under ‘Record only mode’
- Fixed an issue with occasional mismatch between MAC address and device ID
Wyze Bulb Color Firmware
1.2.0.508 (October 31, 2022)
- Improved the color algorithm
1.2.0.435 (June 6, 2022)
- Extended the timeout when downloading firmware
Update 6/13/22: The issue with this firmware has been resolved. We are now releasing the firmware again.
Note: This firmware has been halted while we look into why some updates have been failing.
1.2.0.429 (February 21, 2022)
- Improved connectivity
- Fixed a Sun Match bug
- Fixed a Sleep Routines bug
- Fixed Music Mode bugs
1.2.0.415 (October 18, 2021)
- Added support for a timer
- Added support for Sun Match
- Added support for grouping with Wyze Light Strip and Wyze Light Strip Pro
1.2.0.339 (May 5, 2021)
- Fixed a bug that caused setup issues
- Other bug fixes
1.2.0.333 (March 16, 2021)
- Added compatibility with CFH (Certified For Humans) bulbs
- Fixed an issue that caused system crashes during BLE setup
Wyze Bulb Color BR30 Firmware
1.0.1.38 (May 15, 2023)
- Fixed an output issue that happened for certain cases
1.0.1.32 (November 22, 2022)
- Bug Fixes
Wyze Bulb White Firmware
1.3.2.29 (June 15, 2022)
- Added support for a blinking light Rule
- Improved connectivity
1.3.2.27 (February 9, 2022)
- Improved connectivity
1.3.2.25 (December 20, 2021)
- Fixed a bug that prevented Scenes from applying correctly
Wyze Bulb v1 Firmware
1.2.0.382 (June 15, 2022)
- Added support for a blinking light Rule
- Fixed a Sleep Routine bug that caused incorrect color temperature to display
1.2.0.378 (January 19, 2022)
- Improved Sun Match
1.2.0.273 (July 29, 2020)
- Added support for Sleep Routines
- Added a Reconnect button for if Wyze Bulb goes offline
- Improved logs
1.2.0.183 (January 21, 2020)
- Added support for power loss recovery options
1.2.0.173 (January 6, 2020)
- Modified Wyze Bulb power behavior to reduce the likelihood of a reset due to a power outage
- Modified what logs collect for improved troubleshooting
- Multiple bug fixes for connectivity issues
1.2.0.146 (October 2, 2019)
- Updated maximum length of SSID used for setup from 25 characters to 31 characters
1.2.0.126
- Fixed an issue causing the bulb’s WiFi adapter to be restricted to the g-band
Wyze Light Strip Pro Firmware
1.1.1.165 (September 21, 2022)
- Added support for effects outside of Music Mode
Note: This requires the upcoming 2.35 app to function correctly.
1.1.1.157 (June 28, 2022)
- Added support for a blinking light Rule
- Improved connectivity
1.1.1.143 (April 18, 2022)
- Updated implementation for timer, vacation mode, sleep routines, Sun Match, and Rules
- Improved Music Mode performance
- Improved color calibration
- Bug fixes
1.1.1.127 (February 14, 2022)
- Modified the color temperature range of Sun Match to be the same as Wyze Bulb
- Improved color accuracy
1.1.1.115 (October 18, 2021)
- Improved Sun Match behavior
- Improved Music Mode behavior
- Fixed a bug that prevented sleep routines from running as scheduled
- Bug fixes
Wyze Light Strip Firmware
1.1.1.164 (September 21, 2022)
- Added support for effects outside of Music Mode
Note: This requires the upcoming 2.35 app to function correctly.
1.1.1.156 (June 28, 2022)
- Added support for a blinking light Rule
- Improved connectivity
1.1.1.142 (April 18, 2022)
- Updated offline reporting logic
- Updated implementation for timer, vacation mode, sleep routines, Sun Match, and Rules
- Improved Music Mode performance
- Improved color calibration
1.1.1.126 (February 14, 2022)
- Modified the color temperature range of Sun Match to be the same as Wyze Bulb
- Improved color accuracy
1.1.1.114 (October 18, 2021)
- Improved Sun Match behavior
- Improved Music Mode behavior
- Fixed a bug that prevented sleep routines from running as scheduled
- Bug fixes
Wyze Switch Firmware
1.2.25 (March 22, 2023)
- Improved the firmware update mechanism to reduce update failures
1.2.24 (January 22, 2023)
- Improved the firmware update mechanism to reduce update failures
- Improved overall device connectivity
- Fixed the auto-reconnect mechanism when the switch is power cycled due to power or connectivity loss
1.2.23 (November 9, 2022)
-
Added support for Schedules in Canada
-
Improved device performance and connectivity
1.2.22 (May 11, 2022)
- Improved automatic reconnection to Wi-Fi networks
- Improved connectivity performance
- Fixed time zone issues for Schedules
1.2.21 (January 19, 2022)
- Improved connectivity performance so that Wyze Switch reconnects faster if signal drops
- Feedback is sent to our team if the switch loses connection and gets stuck so our team can investigate which part of the connectivity failed
- Improved Schedules
1.2.20 (January 5, 2022)
- Adjusted Vacation Mode intervals to align more with our other products
- Improved Schedule trigger accuracy
- Improved Daylight Savings Time (DST) logic for Schedules
- Improved input validation and responsiveness
Wyze Plug Outdoor Firmware
1.2.0.333 (January 3, 2023)
- Improved connectivity
- Improved sunrise/sunset execution for Schedules
- Fixed auto-reconnection bugs
1.2.0.329 (November 7, 2022)
- Fixed a Schedules bug that caused schedule execution inconsistency
- Fixed a Schedules bug so now all time zones and all days of the week are supported
1.2.0.309 (September 12, 2022)
- Fixed multiple issues that resulted in firmware update failure
1.2.0.299 (July 5, 2022)
- Optimized memory to increase network stability
- Improved overall connectivity performance
1.2.0.293 (April 25, 2022)
- Fixed connectivity and offline issues
1.2.0.273 (February 7, 2022)
- Added support for optional automatic updates
1.2.0.219 (January 3, 2022)
- Improved syncing behavior when Wyze Plug Outdoor reconnects
1.2.0.216 (October 11, 2021)
- Added a pop-up message when the connected WiFi strength is low to help users find a suitable location for their device
- Added a status message during firmware update
Note: This is an improved firmware that makes the changes from 1.2.0.206 but fixes a stability issue that we found in that version.
1.2.0.206 (August 30, 2021)
- Added a pop-up message when the connected WiFi strength is low
- Added a status message during firmware update
Note: This firmware is halted while we look into a potential issue with it. If you have had trouble with your Wyze Plug Outdoor after updating the firmware, please reach out to Wyze Customer Support.
1.2.0.113 (July 7, 2021)
- Added the ability to use Certified for Humans and Bluetooth pairing at the same time after the device is reset
1.2.0.93 (April 14, 2021)
- Fixed a group control bug
- Fixed a sunrise and sunset scheduling bug
1.2.0.83 (March 3, 2021)
- Fixed energy monitoring bugs
1.2.0.73 (January 27, 2021)
- Fixed schedule bugs
Wyze Plug (2022) Version Firmware (With Key Design)
1.2.0.236 (November 29, 2022)
- Improved accuracy for Schedules
- Improved reliability and accuracy of high temperature warning for indoor plugs
- Fixed a bug that caused schedules to execute 1 day from when they’re set
1.2.0.199 (August 10, 2022)
- Initial firmware after manufacturing
Wyze Plug (2021 Version) Firmware (With Key Design)
1.2.0.233 (January 3, 2023)
- Improved accuracy for Schedules
- Fixed a bug that caused schedules to execute 1 day from when they're set
1.2.0.206 (May 11, 2022)
- Improved network stability issues and overall connectivity performance
- Fixed a bug that caused Wyze Plug (2021) to go offline regularly
1.2.0.179 (February 28, 2022)
- Improved network stability issues and overall connectivity performance
- Fixed a bug that caused frequent connectivity issues
Note: Wyze Plug firmware 1.2.0.179 is being halted as we look into reports of connectivity not being improved by this update and plugs that stop responding after updating. Some regain function a day or two later but others are still unresponsive. If this has happened to you, please reach out to Wyze Customer Support.
1.2.0.176 (January 19, 2022)
- Added Bluetooth firmware logs if the plug has trouble with setup
Note: This firmware is being halted due to an identified issue that causes the plug to go offline often. We have identified the root cause and are working on a firmware release that will fix the problem.
1.2.0.126 (December 6, 2021)
- Added support for Time of Day local scheduling
1.2.0.93 (February 24, 2021)
- Improved plug performance
1.2.0.76 (January 18, 2021)
- Fixed a bug that caused the status light to remain on
Original Wyze Plug Firmware
1.2.0.80 (August 4, 2020)
- Improved device connectivity
- Improved the device log
- Bug fixes
1.2.0.72 (March 4, 2020)
- Improved logs for more accurate troubleshooting data
- Bug fixes
1.2.0.56
- Fixed an issue preventing connecting to a network that has an SSID with more than 24 characters
Wyze Floor Lamp Firmware
0.1.10 (May 10, 2021)
- Bug fixes
Wyze Floor Lamp Remote Firmware
0.0.19 (May 10, 2021)
- Bug fixes
Wyze Mesh Router Pro
1.0.1.109 (May 1, 2023)
-
Added support for NAT loopback
-
Updated local UI SSL certificate
-
Fixed a bug that prevented the root router from obtaining IP from an ISP modem if the router boots up before the modem
-
Fixed a bug that prevented IPv6 from working properly
-
Fixed a bug that prevented parental controls from taking effect when an uppercase character was configured in the domain
-
Fixed a bug that prevented client devices from obtaining IP when connected to a guest SSID for a satellite router with Ethernet backhaul
Wyze Mesh Router Firmware
1.0.1.108 (May 1, 2023)
-
Added support for NAT loopback
-
Updated local UI SSL certificate
-
Fixed a bug that prevented the root router from obtaining IP from an ISP modem if the router boots up before the modem
-
Fixed a bug that prevented IPv6 from working properly
-
Fixed a bug that prevented parental controls from taking effect when an uppercase character was configured in the domain
-
Fixed a bug that prevented client devices from obtaining IP when connected to a guest SSID for a satellite router with Ethernet backhaul
1.0.0.74 (January 18, 2023)
- Fixed a bug that prevented the root router from obtaining IP from certain ISP modems after bootup/reboot with an Ethernet cable connected to the modem
- Fixed a bug that caused BLE binding to fail when WAN IP is obtained but the system time isn’t synced with NTP
1.0.0.63 (November 15, 2022)
- Changed the client list reporting interval. Online report will be in 5 minutes and other changes will be reported in 10 minutes.
- Fixed a bug that caused duplicate MACs in the client list when the backhaul is wired
- Fixed a bug that prevented the Internet Connectivity LED from working after running for a long time
Wyze Air Purifier Firmware
1.0.13.2 (January 3, 2023)
- Fixed a bug that incorrectly reported maximum AQI
1.0.10 (September 12, 2022)
- Added support for Bluetooth log collection instead of requiring Wi-Fi connection
1.0.9 (August 4, 2022)
- Improved Wi-Fi stability
- Fixed a bug that prevented the available Wi-Fi network list from showing during setup
1.0.6 (July 5, 2022)
- Improved Wi-Fi connectivity
Note: This firmware is halted because of an issue with the upload. We're sorry and are working on a new version.
1.0.3 (April 11, 2022)
-
Adjusted the formula for AQI and PM2.5 conversion
-
Added the ability to select automatic updates
-
Improved default filter life calculation
-
Fixed a location sharing bug that impacted outdoor air quality data and caused repeated prompts
-
Fixed a pollen data update bug that caused repeated prompts
-
Fixed a Wi-Fi icon bug after factory reset
Wyze Thermostat Firmware
1.2.7 (May 4, 2023)
-
Fixed a reboot issue that occurred after the thermostat was disconnected from Wi-Fi
-
Fixed a sensor bug that occurred when Motion-sensing Comfort was turned off
1.2.5 (October 26, 2022)
- Improved connectivity
- Fixed an issue causing firmware updates to fail
- Bug fixes
Note: This is a targeted release to those users that updated to 1.2.4.a2.
1.2.4.a2 (October 19, 2022)
- Improved connectivity
- Fixed an issue causing firmware updates to fail
- Bug fixes
Note: We found an issue with how this firmware interacts with the cloud and have halted it. We're working on an improved version now and appreciate your patience.
1.2.1 (May 4, 2022)
- Improved processor sync performance
- Improved Wi-Fi offline reporting performance
- Fixed a bug that may cause a disconnection after updating firmware
1.2.0 (February 21, 2022)
- Added a restart function in the app to improve the troubleshooting experience
- Added a new temperature calibration equation for better accuracy
- Added the ability to use weather data to determine the heating stage (app and cloud changes need to happen before this is functional but the firmware part is ready)
- Improved connectivity
- Improved the Fan Activation Delay mechanism so the fan will start to run after the furnace starts with a 15-minute delay when the control board has no internal logic
- Improved the synchronization between the app and the thermostat
- Fixed a fan issue for heat pump systems
1.1.8 (July 14, 2021)
Note: Requires 2.22 app version.
- Increased the report frequency for better stability
- Fixed a filter reminder bug that caused it to show 0 after an update
- Fixed an auto-switch bug that would incorrectly activate the motion sensor
1.1.7 (May 12, 2021)
- Adjusted the temperature correction formula to improve accuracy
- Heating stage difference is reduced from 5F to 4F
- Fan activation delay is improved
- Coast to Cool is 30 seconds now
- Added a new Fan Cycle setting that matches the app
- Removed Fan Cycle from the device user interface
- UI improvements
- Fixed a bug that caused the thermostat to show as offline when unplugged and reattached
Note: Requires 2.20 app version.
1.1.6 (March 29, 2021)
- Improved device stability
- Improved control logic
Note: This rollout is slower than some of our other firmware releases. If you do not have the firmware yet, you will receive it later. Thanks for your patience!
1.1.2 (March 10, 2021)
- Changed to a new filter reset mechanism to fix an Android issue preventing filter resets
- Improved calculations for users traveling across time zones
- Added a 15 second delay between fan and heating to prevent cold air from blowing before the furnace warms
- Added a differential temperature feature to give more control of temperature accuracy to balance savings and comfort
Walmart Wyze Robot Vacuum Firmware
1.6.306 (December 1, 2022)
- Added support for Multi-floor Mapping
- Added support for Spot Cleaning
- Added support for a Do Not Disturb setting to turn off voice prompts
- Added a multi-point relocation algorithm. After starting, the vacuum positioning time will be slightly longer to improve navigation performance.
- Bug fixes
Note: This firmware is already present on many Wyze Robot Vacuums purchased from Walmart. This is why it has release notes already listed below.
1.6.202 (March 1, 2023)
- Bug fixes
Note: This is a 2-part firmware update and is only available for vacuums using 1.6.199. Vacuums running 1.6.306 already have the changes in 1.6.199 and 1.6.202.
1.6.199 (March 1, 2023)
- Added support for Multi-floor Mapping
- Added support for Spot Cleaning
- Added support for a Do Not Disturb setting to turn off voice prompts
- Added a multi-point relocation algorithm. After starting, the vacuum positioning time will be slightly longer to improve navigation performance.
- Fixed firmware update bugs
- Bug fixes
Note: This 2-part firmware update is only available to vacuums using version 1.6.113. Some vacuums purchased from Walmart already have version 1.6.306. Beta testers using old test firmware ending in .126, .130, or .173 will receive more information about the update process soon and will not be able to update to this firmware yet.
Original Wyze Robot Vacuum Firmware
1.6.202 (March 22, 2022)
- Bug fixes
Note: This firmware will only be available for vacuums using the 1.6.199 firmware version. This will be a double update where the 1.6.199 version is installed before the vacuum updates to 1.6.202.
1.6.199 (March 22, 2022)
- Improved the navigation algorithm
- Fixed audio prompt bugs
- Fixed firmware update bugs
Note: This firmware will start as only available to a portion of people currently using firmware 1.6.113. The rest of eligible vacuums will be given access to the firmware update later. People using a different beta firmware version will be merged at a later time and will receive more information about the process then.
1.6.113 (April 19, 2021)
- Added indicators when connecting to WiFi and updating firmware
- Optimized the mapping algorithm (use the Reset Map/Quick Mapping function to enable this)
- Optimized WiFi reconnection
1.6.97 (January 18, 2021)
- Added support for room editing
- Matched a server-side authentication update
- Updated the device time sync implementation
Note: If you have a Wyze Robot Vacuum, please update as soon as you can to prevent service interruption.
1.6.75 (December 17, 2020)
- Added support for designated Area cleaning
- Optimized the map algorithm
- Optimized virtual wall setting
- Adjusted voice prompt
Wyze Sprinkler Controller Firmware
1.0.10 (July 26, 2022)
- Further improved a bug fix that addresses Schedules not running for some devices
1.0.8 (April 20, 2022)
- Fixed a bug that caused Quick Run and Schedules to stop watering shortly after starting
1.0.7 (March 10, 2022)
- Fixed a bug that caused watering to stop shortly after starting
Note: This firmware is halted because it appears to have not fixed the watering issue. We are continuing to investigate this problem.
1.0.4 (May 19, 2021)
- Added support for an emergency stop function if a zone has been running for more than 3 hours
1.0.3 (April 21, 2021)
- Fixed a bug that interfered with physical button function
1.0.2 (April 14, 2021)
- Added support for emergency water shutoff
Wyze Lock Bolt Firmware
1.0.6.2 (March 1, 2023)
- Added support for locking or unlocking Wyze Lock Bolt from the Wyze Video Doorbell Pro live stream
- Removed the manual trigger required after resuming auto-lock hours
Wyze Lock Firmware
2.1.22.0 (August 4, 2020)
- Fixed a frequent calibration loss bug
- Fixed a Works With Alexa compatibility bug
2.1.16.0 (April 20, 2020)
- Added support for Trash Mode
- Improved the Wyze Lock calibration process
- Added a 24 hour open door status alarm
- Changed the Bluetooth broadcast name
Note: This is being rolled out gradually to Wyze Lock users. If you do not see this update today, you should receive it in the next week.
Wyze Scale S Firmware
1.0.107 (April 6, 2022)
- Changed error code C to error code CAL
- Resolved Bluetooth connection conflicts between Wyze Scale, Wyze Watch, and Wyze Band for Pixel 6 and Pixel 6 Pro
- Fixed a bug that caused false Bluetooth connections between the scale and phone and led to high battery consumption
1.0.105 (October 26, 2021)
-
Increased the memory from 24 to 40 slots to save more measurements with the app closed
1.0.104 (September 15, 2021)
-
Fixed a bug that restored incorrect history data
Wyze Scale Firmware
1.1.4 (September 10, 2020)
- Improved the algorithm
- Bug fixes
Note: This is a gradual roll out. If you do not see the firmware today, you should see it within the next two months.
1.1.3 (August 11, 2020)
- Improved the algorithm
- Bug fixes
1.1.2 (July 8, 2020)
- Extended the age range for body composition analysis to 100
- Improved the algorithm
1.1.1 (May 15, 2020)
- Improved the data connection reliability
- Optimized the algorithm
- Bug fixes
Wyze Watch 47mm Firmware
0.12.49 (July 7, 2021)
- Turned off continuous heart rate measurement by default
- Optimized ANC connection
- Solved the abnormal connection problem from version 0.12.48 that caused issues such as watch face syncing failure
0.12.43 (May 12, 2021)
- Updated the Raise to Wake algorithm
- Now automatic heart rate detection will no longer occur during charging
- Extended the limits for heart rate measurement
0.12.41 (April 28, 2021)
- When pairing the watch for the first time, the cycle tracker is hidden or presented according to body type selection
- Added support for rearranging applications on the watch and toggling whether the cycle tracker is visible (upcoming 2.20 app version required)
- By default, the option for heart rate measurements every 5 minutes is turned on
- Improved the vibration strength of message notifications
- Improved the data syncing for the heart rate on the dial
- The screen will turn off automatically in 7 seconds when using the timer
- Improved the algorithm for calorie calculation when exercising
- Fixed a bug displaying incorrect iOS message list status
0.12.37 (March 25, 2021)
- Fixed a bug that prevented Find My Phone from working during updating
- Optimized weather data
- Hid the cycle tracker app for people choosing a masculine body type during setup
- Improved connectivity
Wyze Watch 44mm Firmware
0.3.97 (September 15, 2021)
- Added support for App Management to allow toggling cycle tracking visibility and changing the app order
- Improved step counting accuracy
- Improved the raise-to-wake algorithm
0.3.91 (June 23, 2021)
- Added app management (Wyze app 2.21 required)
- Fixed a Cycle Tracking UI error
- Optimized Cycle Tracking logic
- Optimized iOS connectivity stability
- Improved watch software stability
0.3.90 (June 2, 2021)
- The screen will now light up when receiving a notification
- Added automatic repair for core data missing error
- Optimized offline Weather data display logic
- Optimized connection stability
- Fixed a bug that caused Weather data to show 0
- Fixed a restart bug
- Fixed a bug preventing iOS notification pushes
- Fixed an abnormal step counting bug
- Fixed a bug preventing sleep data
- Fixed Raise to Wake failure bug
- Fixed a core data missing bug
0.3.68 (April 28, 2021)
- Fixed a bug that caused the Wyze logo to display for too long after an update
- Fixed a bug that caused the watch to reboot
Note: This update is halted as we investigate the cause of update failures for some watches.
0.3.65 (April 12, 2021)
- Optimized system connection stability
- Optimized Do Not Disturb mode logic
- Optimized the red dot reminder UI
- Fixed a disconnection issue
- Fixed a bug causing the device to reboot
- Fixed a bug that prevented notifications
- Fixed a UI bug from when the watch was charging
- Fixed a bug that caused the watch to restart during heart rate detection
Wyze Band Firmware
1.0.8.30 (October 13, 2020)
- Improved algorithm accuracy for sleep tracking and raise-to-wake
- Fixed a bug that would cause the charging screen to appear when the band is not charging
- Fixed a bug that would cause unexpected reboot during a firmware upgrade
- Fixed a vibration bug with phone call notifications
1.0.7.96 (September 9, 2020)
- Added a Tool Box function that includes a Stopwatch and Flashlight
- Added the ability to decline a phone call from Wyze Band
- Optimized battery level calculation
1.0.7.78 (August 24, 2020)
- Improved heart rate monitoring accuracy
- Improved sleep cycle and duration calculations
- Improved the Notification Box UI
1.0.7.70 (August 10, 2020)
- Added Google Fit and Apple Health data integration
- Added a freestyle exercise mode
- Added support for 12hr/24hr time format change
- Added support for red dot notifications
- Added support for changing screen light duration
- Added a reminder for multiple device logins
1.0.6.96 (June 8, 2020)
- Fixed a bug causing default alarms to disappear if unpaired
- Fixed a bug that prevented Wyze Band from becoming fully charged
- Fixed a Bluetooth connection issue caused by abnormal local Bluetooth binding information for some devices
- Fixed an issue that could cause Heart Rate data sync failures
- Fixed a device rebooting issue that occurs when too many notifications are stored
- Fixed a bug that blocked notifications after phone reboot
- Fixed a bug leading to frozen step counts
- Optimized the Weather UI
- Improved unlocking performance and touch screen responsiveness
- Improved the Bluetooth re-connection mechanism
1.0.6.78 (May 27, 2020)
- Improved Alexa response time
- Improved touch screen performance and response time
- Improved Alexa error messaging
- Paused vibrations when speaking to Alexa to improve received sound quality
- Alexa now resumes the Listening state after recovering from internet or Bluetooth connection error states
- Holding the Home button in Locked mode no longer unlocks the band or activates Alexa
- Improved Bluetooth connectivity with Samsung and Google devices
- Clicking on Shortcuts through Wyze Band now triggers a light vibration response
- Fixed an issue that caused some alarms to not work when there were multiple alarms set within a short period of time
- Fixed a bug causing black lines on the screen when exiting Alexa
- Fixed a bug that could cause a crash when scrolling in the band screen during custom Clock Face image installation
- Fixed a font error on the Weather page
- Fixed a battery drain issue
- Removed redundant iOS Notification logs to optimize Bluetooth connectivity
1.0.6.43 (April 29, 2020)
- Improved Bluetooth connectivity
- Fixed a bug so that caused holding the Home button to unlock the screen when lock screen mode is enabled
- Optimized the battery level algorithm
- Added support for a Sedentary Reminder that will remind people to move around after 50 minutes of inactivity
- Added support for a daily Step Goal that will track progress on daily step goals
- Fixed a bug that would cause Find My Phone to not work after the first attempt
- UI improvements
Note: This is being rolled out to Wyze Band customers gradually. If you do not see the update today, you should receive it in the next week.
1.0.5.80 (April 23, 2020)
- Improved the Alexa integration
- Fixed a bug that caused Wyze Band to freeze with a black screen
Wyze Buds Pro Firmware
0.6.6.0 (November 3, 2021)
- Added a Noise Cancellation Off option for touch control
- Improved battery measurement accuracy
- Improved an issue that caused occasional reboots on certain phone models
- Fixed a bug that caused the right earbud to turn noise cancellation off
0.6.5.2 (August 26, 2021)
- Added additional case battery percentage syncing to fix a bug that prevented the case battery from displaying
- Improved Bluetooth connection
- Sped up the buds startup process
- Updated the default volume so it is not too loud
- Improved touch control recognition for triple tapping
- Fixed a bug that caused the low battery level voice prompt to occur twice
Wyze Buds Firmware
0.0.3.18 (October 25, 2021)
- Added support for switching between devices by long-tapping both earbuds
Wyze Headphones Firmware
2.1.143 (November 3, 2021)
- Improved auto-pause
- Fixed a bug that prevented muting in Zoom meetings on Windows devices
- Fixed the LED light status when the battery depletes
- Fixed a bug that caused failure to power on in some cases
2.1.133 (May 19, 2021)
- Fixed a bug that caused the headphones to reboot during calls
- Improved the auto-pause algorithm
2.1.126 (March 22, 2021)
- Added a Noise Cancellation Off mode
- Optimized call experience and quality
- Improved auto-pause accuracy
- Fixed a firmware update bug
- Fixed an auto power-off bug while the headphones are in a call
2.1.112 (January 5, 2021)
- Fixed a pairing issue on Android
- Improved Bluetooth connection performance
- Fixed a bug that caused noise when inserting a 3.5mm audio cable
2.1.111 (December 14, 2020)
- Improved the experience of waking up Siri
- Fixed the audio stuttering issue on Android
- Fixed an Auto Power Off bug
- Fixed an issue causing microphone volume to be too low
- Fixed the disconnection bug with Macbooks
- Improved the device switching experience
- Improved the compatibility with iMac
2.1.105 (November 18, 2020)
- Fixed some random reboot cases
- Fixed a bug causing noise during voice calls
- Fixed a bug that sometimes prevented EQ from working
- Fixed a bug that caused incomplete playing when listening to short audio clips
- Fixed a bug causing noise when using Alexa
- Fixed a bug causing lost settings after updating firmware
- Fixed a battery level bug that occurred after turning off then on the headphones without charging
- Improved wearing detection
Wyze Sense Hub Firmware
4.32.12.534 (March 1, 2023)
- Added support for Additional PINs (2.40 or above app version required)
- Improved connectivity
- Fixed a bug that prevented the Environment Hazard reminder from being stopped
- Fixed a bug that turned off Environment Hazard functions
- Fixed a bug that blocked switching to Wi-Fi after connecting via Ethernet
4.32.11.365 (November 28, 2022)
- Improved the Environment Hazard Remediation experience
- Fixed Bluetooth log collection
4.32.10.315 (October 21, 2022)
- Improved performance
4.32.9.264 (July 7, 2022)
- Fixed a Wyze Sense Hub bug that caused sensor pairing and connection failures
4.32.9.249 (April 25, 2022)
- Improved Ethernet network connectivity
- Enhanced Wyze Sense Hub audio volume
- Fixed a bug that prevented the Entry Notice from playing when a door was opened
- Other bug fixes
Note: This firmware does not address the sensor connectivity issue some are experiencing and we're continuing to work on resolving that issue. Thank you for your patience.
4.32.8.246 (April 8, 2022)
- Security improvements
Note: This firmware does not address the sensor connectivity issue some are experiencing and we're continuing to work on resolving that issue. Thank you for your patience.
4.32.8.213 (March 2, 2022)
- Improved network connectivity and reporting accuracy
- Bug fixes
Note: This firmware is halted due to reports of issues such as sensor connectivity problems. If you are experiencing trouble with your Wyze Sense setup after updating, please reach out to Wyze Customer Support.
4.32.7.177 (December 8, 2021)
- Network reliability and performance improvements
- Bug fixes
4.32.6.142 (October 18, 2021)
- Fixed a bug that prevented some users from saving the entry sensor chime sound in Tune Settings
- Fixed a bug that caused some users to have their entry sound off by default
- Fixed a bug that caused a decrease in Wyze Sense Hub voice prompt volume from last update
- Fixed a bug that caused difficulty in switching modes for some users
- Fixed a bug that caused an operation delay after switching networks for some users
Known Issue: There is a user interface bug that makes it look like hub volume has not been changed to the low or mid settings. Upon re-entering the Hub Settings page, the display will revert back to the previous setting. The actual volume will be changed and saved.
4.32.5.92 (September 22, 2021)
- Fixed a bug that caused some hubs to turn off immediately after the hub is unplugged from power
4.32.5.80 (September 8, 2021)
- A PIN is now required to switch to enter Disarm Mode from the keypad
- Added a fast beep for Entry and Exit Delay
- Fixed a bug that caused some delayed false alarms for some people
- Security improvements
4.32.4.295 (August 4, 2021)
- Added active sensor activity to Monitoring Events
- Added a toggle for the entry/exit delay countdown sound
- Added a chime notification sound when on-duty sensors are triggered upon entry
- Improved the offline Hub audio notification experience
4.32.3.183 (June 10, 2021)
-
Improved Hub offline performance
-
Optimized sensor function reliability
-
Improved the Hub countdown experience
4.32.2.127 (April 6, 2021)
- Security improvements
Wyze Sense Keypad Firmware
0.0.0.63 (April 6, 2021)
- Initial keypad firmware
Wyze Sense Bridge Firmware
0.0.0.33 (July 8, 2019)
- Added status light control
- Removed Bridge reset button functionality