- From the Home Tab tap the + plus sign on the top left.
- Select Add Device.
- Tap Sensors > Wyze Climate Sensor
- On the next screen, select the hub you want to connect your sensor to.
- Remove the plastic battery tab that is located on the back of the sensor.
- Press and hold the reset button on the side of the sensor until the light flashes.
- Setup will complete automatically.
- Name the sensor once the setup finishes.
Placing Your Sensor
- Now that you have added the Sensor with the Wyze app, the sensors can be attached with the included adhesive on the back of the Sensor.
- Note: Before sticking your sensor to a surface, move it to the area you want it and test it to make sure it works at this distance from the Wyze hub.
- Mount by cleaning the surface, remove the paper from the adhesive backing, and place it. Keep in mind that the adhesive should be considered permanent, so make sure it’s where you want the sensor prior to mounting.