Installing your new Wyze Accessory Bulb is as easy as screwing it in, and turning on the power to the socket. You can even install and link up to 5 total accessory bulbs at the same time!
Before installation: At the electrical panel or light switch, shut off power to your existing light fixture before proceeding. Then, check that your socket type is a standard E26 socket.
What's in the box?
- Wyze Accessory Bulb x 1
- Quick Start Guide x 1
To install your Wyze Accessory Bulb:
- In the Wyze app, tap Home, then tap the plus sign + on the top right.
- On the Add menu, tap Device.
- Tap Cameras > Wyze Bulb Cam > Accessory Bulb.
- Check your socket type to ensure it's a standard E26 socket. Tap Next.
- Check your sconce, to ensure it's an open fixture. Tap Next.
- If you haven't already, shut off power to your light fixture. Tap Next.
- Unscrew your existing bulb from the lamp socket. Tap Next.
- 🔥 Be careful! Your existing bulb may be hot.
- Install your Wyze Accessory Bulb by twisting it into the socket - easy! Tap Next.
- Turn on power to your accessory bulb(s). Tap Next.
- Select a device to pair your accessory bulb with. Your existing Bulb Cam or Accessory Bulb will search for your bulb.
- When your bulb is found, tap Pair then Done.