Follow along in this video, the Wyze app, and this article for how to mount your Wyze Window Cam.
To mount your camera on a wall:
- After pairing your Wyze Indoor Cam Pan in the Wyze app, the Installation page will show.
- Verify that you have everything needed for installation.
- Position your camera at your mounting location with the wall bracket.
- Stick the included mounting guide to your mounting location.
- Drill the holes at your mounting location.
- Pre-drill the holes to be 3/16 inches in diameter and 13/16 inches deep.
- Insert the expansion tubes (drywall anchors) into the holes if needed.
- Screw in the wall screws into the expansion tubes, leaving a 3/8-inch gap between the screw head and the wall, so the wall bracket can hang from the screws.
- Place the Wall Bracket over the screws, then tighten the screws to secure the bracket in place.
- Mount your Wyze Indoor Cam Pan onto the Wall Bracket.
- Thread the cable through the bracket.
- Push inwards to lock the base of the camera into place.
- Follow the in-app instructions to complete the setup process.
- Enjoy your new Wyze Indoor Cam Pan!