Installing your Wyze Cam Floodlight v2 is as simple as replacing your existing floodlight by connecting it to a junction box. As long as you have a junction box and neutral wiring, and self-installation is legal in your area, this process should take about 30 minutes.
-> You must have an existing junction box and a neutral wire to use Wyze Cam Floodlight v2.
-> At the electrical panel, shut off power to your junction box before proceeding.
Before you begin installation:
Check your local laws and building codes before doing any performing any electrical work. Your may live in an area that requires a permit and professional installation.
What’s in the box?
- 1x Wyze Cam Floodlight v2 (Assembled)
-
1x Mounting Accessory Kit
-
6x Bracket Screws
- 2x #6
- 2x #8
- 2x #10
- 1x Ground Wire Screw
- 1x Floodlight Screw
- 1x Rubber Stopper
- 1x Mounting Bracket
- 2x Wire Nuts
- 1x Hook
-
6x Bracket Screws
- 1x Quick Start Guide
Required tools:
- Phillips Screwdriver
- Ladder
To install your Wyze Cam Floodlight v2:
- In the Wyze app, tap the +plus sign then Device > Cameras > Wyze Cam Floodlight v2.
- Read the High Voltage warning before tapping Got it!
- Are you replacing an existing floodlight?
- If yes, tap I'm replacing an existing floodlight.
- At your electrical panel, turn off power to your floodlight. Tap Next.
- Carefully remove your existing floodlight. Tap Next.
- If no, tap I don't have a floodlight to replace.
- Do you have an existing junction box?
- If yes, tap Next.
- Check that your junction box is at least 10 feet off the ground. Tap Next.
- If no, your wiring is not compatible with Wyze Cam Floodlight v2. Stop the installation process and contact a licensed electrician for assistance.
- If yes, tap Next.
- Do you have an existing junction box?
- Tap Check Your Wi-Fi Signal Strength in the Wyze app.
- If your signal is Out of Range or Poor Connection, contact your ISP for options.
- Tap Continue Setup.
- Tap Start Installation.
- If yes, tap I'm replacing an existing floodlight.
Continue below, following along in the Wyze app to wire your floodlight.
- Review the Installation page for what You Will Need for installation, and what's In the Box.
- Confirm that you have the required tools and items. Tap Next.
- IMPORTANT: At your electrical panel, double-check that you've shut off power to your floodlight or junction box. Tap Next.
- Follow along in the Wyze app to wire your Wyze Cam Floodlight v2.
- Once installation is complete, turn on power at your breaker when prompted.
- Tap Begin Setup, then continue to Wyze Cam Floodlight v2 Setup Guide.