Travel Mode

Travel Mode gives you the freedom to use your Wyze Cam Outdoor anywhere, even when you're away from home. This feature lets you use the camera without an internet connection, and it can be enabled on the camera or Base Station.

WCO-travel-mode.png

To enable Travel Mode on the Wyze Cam Outdoor:

Reminder: Travel Mode must be enabled before you leave home. It cannot be set up remotely.

  1. In the Wyze app, tap the Wyze Cam Outdoor.
  2. Tap the SettingsGear__1_.png gear icon in the top right.
  3. Tap Travel Mode.
  4. Turn on the camera if it isn't already, then tap Continue in the app.
  5. Press the Wyze Cam Outdoor's SYNC button twice in quick succession, then tap Continue in the app.
  6. Connect to the camera's WiFi network from your phone's WiFi list, then navigate back to the Wyze app. The network will look like this:
    WCO-camera-wifi.png
  7. Tap OK when prompted to allow your location, and allow access on the next pop-up.
  8. Enter a password between 8-16 characters, then tap Save.
    • Setting a password is optional, and increases the security of your camera while in Travel mode.

To turn off Travel Mode:

  1. In the Wyze app, tap the Wyze Cam Outdoor, then the SettingsGear__1_.png gear icon in the top right.
  2. Tap Exit Travel Mode.

Another option: If you have multiple cameras connected to a single Base Station, you can use the Base Station to watch up to 4 Wyze Cam Outdoor live streams at the same time.

To turn on Travel Mode from your Base Station:

  1. In the Wyze app, tap the Base Station your cameras are connected to.
  2. Tap the SettingsGear__1_.png gear icon in the top right, then Travel Mode.
  3. Turn on the camera if it isn't already, then tap Continue in the app.
  4. Press the Base Station's SYNC button twice in quick succession, then tap Continue in the app.
  5. Connect to the Base Station's WiFi network from your phone's WiFi list, then navigate back to the Wyze app.
    WCO-base-wifi.png
  6. Tap OK when prompted to allow your location, and allow access on the next pop-up.
  7. Enter a password between 8-16 characters, then tap Save.
    • Setting a password is optional, and increases the security of your Base Station while in Travel mode.
When Travel mode is enabled, the status light will flash yellow.

To turn off Travel Mode:

  1. In the Wyze app, tap the Base Station, then the SettingsGear__1_.png gear icon in the top right.
  2. Tap Exit Travel Mode.

Another option: Single-press the SYNC button on the Base Station to exit Travel mode.

Additional Notes:

Have more questions? Submit a request