Yes, you can mount the floodlight on a ceiling / overhang or wall mount, as long as you have a junction box and a neutral wire.
To position your Wyze Cam Floodlight from an overhang:
- Ensure you have a functional junction box in the location you plan to use your device. If you do not have an existing junction box, please contact a licensed electrician.
- Remove Wyze Cam Floodlight from the box and position it with the speaker on the bottom of the base.
- Raise the LED lamps to the highest position first and then rotate them 180° to the lower the LED lamps.
- Tilt the camera slightly up so the camera is looking out and the motion sensor is facing out and downward when mounting from an overhang.
- Follow the standard installation process shown here.
To position your Wyze Cam Floodlight vertically from a wall:
- Ensure you have a function junction box in the location you plan to use your device. If you do not have an existing junction box, please contact a licensed electrician.
- Refer to the sticker on Wyze Cam Floodlight and rotate the camera 180° so that the speaker is at the top and the motion sensor is pointed down.
Follow the standard installation process shown here.