Installing your Floodlight Cam Plug-In Mount is as simple as securing in the mounting plate to the wall, wiring your Wyze Cam Floodlight to it, then plugging it into power*.
* Only plug it into power AFTER installation is complete.
Before you begin installation
Turn off power at the circuit breaker before installation. The plug-in mount works with a GFCI outlet for power. Make sure, for the outlet you plan to use for your floodlight, that the power is turned OFF before installation.
WARNING. Risk of electrical shock! Do not plug the plug-in mount into power until AFTER installation is complete as indicated by the guide below.
What's in the box?
- Wyze Floodlight Cam Plug-In Mount x1
- Mounting Kit x2
- Foam Tape x2
- Long Screw x1
- Silicone Ring x1
- Quick Start Guide x1
To install your Wyze Floodlight Cam Plug-In Mount:
- Remove the floodlight plug-in mount from the packaging.
- Carefully read the instructions on the red sticker labels before removing it for mounting.
- Position your plug-in mount at the area you want your floodlight to be, near your GFCI outlet.
- The cord from the plug-in mount is 20 feet long.
- Secure the mounting plate to the wall using the screws included in the mounting kit.
- Remove the paper backing from each piece of foam tape and place it over the curved screw holes on the mounting plate.
- Next, follow along in the Quick Start Guide and/or the video below to mount your Wyze Cam Floodlight v1, Wyze Cam Floodlight v2, Wyze Cam Floodlight Pro.
Here's a handy video for how to install Wyze Floodlight Cam Plug-In Mount and any Wyze Cam Floodlight model: