Articles in this section

Keypad Setup Guide

If you haven't already, please check out our Keypad Installation Guide to get it mounted.

An alternative to start the setup process is to continue in the Wyze app immediately after the Lock's setup.

  1. In the Wyze app, tap the Wyze Lock you're setting up a Keypad for.
  2. Go to Settings by tapping the SettingsGear__1_.png gear icon in the top right.
  3. Tap Keypad Settings > Add Keypad.
  4. Press and hold the Lock button on the Keypad until the light is flashing green.77557869_max.jpg
  5. Tap Next in the Wyze app.
  6. The Keypad will automatically proceed through setup until it connection is complete.
  7. Once the Keypad is connected, enter a 4-8 digit code in the Wyze app.*
  8. You're all set!

Be sure to choose a code that you'll remember, or write it down so you don't forget.

Was this article helpful?
8 out of 19 found this helpful

Contact Us

  • Service Status

    Check if there are any ongoing issues on & the Wyze app.

  • Live Support Hours:

    Monday through Friday, 6AM-6PM, Saturday & Sunday 8AM-4PM Pacific. Holiday hours may vary.

  • Join our Community

    Find answers, ask questions, and connect with your fellow community of Wyze users.