You’ll find the status lights on the front of your Wyze Lock Bolt v2. No light? Make sure all 8 AA batteries are properly inserted.
️⚡ All Wyze devices have a handy status light that helps determine what state the device is in.
Wyze Lock Bolt v2 Status Light Guide
Wyze Lock Bolt v2 Status Lights: During Setup
- Pulsing red – The device is resetting and entering the setup stage.
- Pulsing green with keypad flashing – Reset successful.
- Pulsing green quickly – Waiting for Wi-Fi info.
- Note: This also applies to the Reset Wi-Fi feature when pressing the reset button 3 times within 3 seconds.
- Pulsing green slowly – The device is connecting to Wi-Fi, please wait.
- Two quick green flashes with a slow “do mi so” beep – Connection successful.
Wyze Lock Bolt v2 Status Lights: During Configuration
- Pulsing green with 3 beeps – Waiting for fingerprint input.
- Flashing green quickly – Fingerprint enrollment successful.
- Flashing red – Fingerprint input failed or timed out.
Wyze Lock Bolt v2 Status Lights: During Daily Use
- Solid green – The lock was successfully locked or unlocked.
- Solid red – The lock failed to lock or unlock.
- Flashing red 3 times – Error.
- Note: This may be due to 5 consecutive failed fingerprint attempts or a lock jam.